Bunnings

Sign in or sign up

No Bunnings account? Sign up
or
PowerPass customer?
Visit the dedicated trade website

Project list

Sign in to your account

Special Order
Intergrain

Intergrain 10L UltraPrep Tannin And Oil Remover

No reviews yet

I/N: 1520522

Intergrain 10L UltraPrep Tannin And Oil Remover

$162

$16.20

per litre
In-store only

Size: 10L


Select your preferred purchase method

StoreFind your item in store

We are unable to determine your nearest store
Bunnings Special Order
This item can only be ordered from the Special Orders desk in-store.

Features

  • A high strength weathered coating remover
  • Helps prepare new timber for coating
  • Low odour
A powerful, high strength liquid remover, UltraPrep Tannin & Oil Remover is used to lift old or weathered existing timber finishes and prepare timber for coating. It can also used as a high strength cleaner. On new timber, it removes dirt, tannins, natural oils and other contaminants from the timber surface, preparing timber for coating.

PREPARATION

Remove surface dirt by sweeping or washing down with water.

APPLICATION

1. Shake UltraPrep Tannin & Oil Remover thoroughly.

2. Wet the timber surfaces to be cleaned with water.

3. Apply UltraPrep Tannin & Oil Remover undiluted to the timber with a stiff bristle brush, broom, or spray. Clean complete sections at one time. Spot cleaning should be avoided to prevent patchy results.

Note: UltraPrep Tannin & Oil Remover is very slippery. Take care when walking on treated surface.

4. Leave UltraPrep Tannin & Oil Remover on the timber for 10–15 minutes. If necessary, apply more UltraPrep Tannin & Oil Remover to keep timber damp throughout this period. Do not allow UltraPrep Tannin & Oil Remover to dry on the surface.

5. For best results UltraPrep Tannin & Oil Remover should be applied to cool surfaces, out of direct sunlight, to avoid the cleaner drying on the timber.

6. Scrub the timber vigorously with a stiff broom. Do not use a wire brush.

7. Rinse off exterior surfaces thoroughly using maximum pressure from a garden hose or using a high pressure water cleaner. For best results, a high pressure water cleaner is recommended.

IMPORTANT: Failure to thoroughly remove UltraPrep Tannin & Oil Remover may result in timber discolouration under clear finishes.

8. If stubborn areas remain, repeat application in those areas as per the instructions above.

9. Rinse off exterior surfaces thoroughly, then clean timber with UltraPrep Timber Cleaner closely following label instructions. Note: After cleaning with UltraPrep Tannin & Oil Remover, some timber species will appear darker. UltraPrep Timber Cleaner will restore brightness.

10. Allow timber to dry thoroughly before applying further products.

Details

Dimensions

 

Width

Height

Length

Product

280mm280mm270mm

Package

230mm315mm230mm

Weight

Easy To Carry

Total Weight 10kg

Specifications

Colour
Clear
Model Name
Intergrain 10L UltraPrep Tannin & Oil Remover
Model Number
552W0103-10L
Material
Salts Based
Volume
10
Application Method
Brush or roller
Interior Use (Yes/No)
No
Clean Up
Water
Primer Required (Yes/No)
No
Minimum Temperature for Use (°C)
10
UV Resistant (Yes/No)
Yes
Time Before Recoating (Minutes)
1440
Waterproof (Yes/No)
Yes
Exterior Use (Yes/No)
Yes
Coverage Area (m2)/L
5
Tintable (Yes/No)
Yes
Container Size (L)
10
Sheen
Satin

Returns

We will gladly assist with returns and exchanges of this product in accordance with our returns and exchanges policy.

Returns Policy

Ratings & Reviews