Product recalls

Identification:

HRN216 Mulch and Catch Domestic Lawn Mower with GCV170 engine. Models: HRN216PKU HRN216VKU

Dates sold at Bunnings: 04 November 2022 – 20 June 2023

Defect:

Due to a manufacturing defect, the camshaft decompressor mechanism in the engine can malfunction. In models without an electric starter this excessive force may be required to pull the starter rope to start the engine. In the model with an electric starter the electric starter may fail to start the motor.

Hazard:

There is a risk of a strain injury from kickback of the starter rope because of high compression within the engine.

What should I do?

Consumers should stop using affected lawn mowers immediately and contact the nearest Authorized Honda Power Equipment Dealer to arrange for their lawn mower to be repaired, free of charge. Consumers can use the following link to locate authorised Honda dealers: Honda Dealer Locator.

For further information

For more information contact Honda customer relations on 1300 559 846 or email customer.relations@honda.com.au

Identification:

• Model CLK0025
• Bunnings Item 0346168
• (Colours red, black, silver, or blue)
• Dates sold: 16 May 2022 – 14 April 2023

Defect:

The product does not comply with the mandatory safety standard for products containing button/coin batteries. The battery compartment is not adequately secured so button batteries may become accessible.

Hazard:

There is a risk of choking, severe internal burn injuries or death to young children if they gain access to the button batteries and ingest them. Consumers may be unaware that the product contains a button battery.

What should I do?

Consumers should immediately cease using the torch and store it out of the reach of children, then return it to any Bunnings store for a full refund.

For further information:

Email: custservice@arlec.com.au or customersupport@bunnings.com.au

Telephone: (03) 9982 5111

Web: www.bunnings.com.au/help-support/product-recalls

 

Identification:

Product Name: 
AEG 58V Ultimate Battery (8Ah #A58BAT18) and (4Ah #A58BAT14) 

Product Identifier: 
The batteries have been sold through Bunnings, Tool Kit Depot retailers or AEG Onsite Trade Solutions throughout Australia from 26th September 2022 to 5th January 2023, with a serial number manufacturing code of H2022, I2022, J2022, 42 2022, 43 2022, 44 2022, 45 2022, 46 2022, 47 2022 or 48 2022.These batteries may have been sold with tools in a combination kit format or sold seperately.

Defect:

A component in the battery may fail causing the battery to overheat and ignite.

Hazard:

Risk of fire or burn injury.

What should I do?

Immediately stop using the affected batteries and remove it from the tool or charger that it may be in use with. Contact Techtronic Industries Australia Pty Limited by telephone, email for either a replacement or a refund.

For further information

Contact Techtronic Industries Australia Pty Limited’s product service on 1300 859 017 (Free Call), or email customerservice@aegpowertools.com.au, or see the website: www.aegpowertools.com.au/support/safety

Identification:

Product Name: 
EARMUFFS 3M PELTOR++X4A HEADBAND 

Product Identifier: 
Model: X4A 3M PELTOR Headband Earmuffs 
– Item ID: AT019317406

Dates Sold 1 Mar 2020 - 30 Sep 2022

Defect:

Affected earmuffs may crack on the exterior surface of the cups and reduce the hearing protection effectiveness.

Hazard:

There is a risk of over-exposure to noise and possible hearing damage depending on the environment the earmuffs are used in.

What should I do?

 1. Consumers should immediately stop using the product and locate the model ID and manufacturing date printed on the outside of the earmuff cup. If your earmuff is an affected model and the manufacturing date is between 03/2020 and 09/2022 continue to step 2.

2. Contact the place of purchase to arrange return of the earmuff and exchange for a replacement product (if available), alternative product, credit or refund.

For further information

consumers can contact 3M by phone on 1800 888 907 Monday to Friday 9:00 am to 5:00 pm or visit the 3M website. 

Identification:

Fiskars 16' Chain Drive Extendable Polar Saw & Pruner was sold at Bunnings stores between 2017 and December 2020.

Defect:

The telescoping poles of the Pole Saw & Pruner can become unsecured and/or separate, causing the poles to come apart, fall down and the saw blade and pruner head to drop.

Hazard:

If the poles come apart and fall down while the product is in use and the saw blade and pruner head drop, this poses a risk of a serious injury to the user.

What should I do?

Consumers should immediately stop using the Pole Saw & Pruner and return the product to their nearest Bunnings for a refund.

For further information, please download the flyer. You can contact Fiskars by calling 02 8665 8200 (Monday to Friday 9am - 5pm AEST), email: Australia.orders@fiskars.com, or by going to www.fiskars.com.au.

Identification:

THG2400BA, THG3200BA, THH2400AA, THH2400AR, THH3200AA, THH3200AR, THX2400DCR, THX3600DCR, THB2200BA, THB3200BA, TG2200RB, TF2200RA, TF3000RA

Remote control supplied with the TT-MRT plug-in controller for use with Heatstrip outdoor heaters.

Dates sold: 22/06/2022 – 24/01/2024

Defect:

The product does not comply with the mandatory safety standard for products containing button/coin batteries.

The button/coin batteries are not adequately secured and are accessible to young children.

Hazard:

There is a risk of choking, severe internal burn injuries or death to young children if they gain access to the button/coin batteries and swallow or place them inside their body. Severe or fatal injuries can happen in 2 hours or less.

What should I do?

1. Consumers should stop using the product and keep it out of reach of children.

2. Consumers should contact Thermofilm to arrange for a replacement remote control.

For further information

If you have any questions about the recall, please call 1300 014 389 or email product.recalls@thermofilm.com.au

Identification:

Model GM40419, The hose is marked AGA 7309 2Q/23. No sticker or colour disc on the hose or fitting.

Dates sold: 2 October 2023 – 11 October 2023

Defect:

The Schrader valve end of the hose may leak when connected to a high-pressure camping stove.

Hazard:

There is a risk of serious injury or death if the leaking gas ignites, which may cause a fire and/or explosion.

What should I do?

1. Consumers should stop using the hose immediately.

2. Consumers should return the hose to the place of purchase for a full refund.

For further information

consumers can call Sitro Group Australia on 1300 174 876, 8:00am to 5:00pm Monday to Friday, or email productsafety@sitro.com.au

Identification:

Blade fuse tester and puller with Narva branding.

Dates sold: 22 Jun 2022 to 13 Jun 2023

Defect:

The product was sold without the warning information that is required for products containing button/coin batteries.

Hazard:

There is a risk of choking, severe internal burn injuries or death to young children if they gain access to the button batteries and swallow or insert them. Consumers may be unaware that the product contains a button battery.

What should I do?

Consumers should immediately place the product out of reach of children and contact BWI for more information on 1800 422 422 or 54494BL@brownwatson.com.au to arrange for the warning labels to be mailed to them.

For further information: 

Consumers can contact BWI for more information on 1800 422 422 or 54494BL@brownwatson.com.au

Identification:

Gardena AquaCount Water-Meter Model No: 18350-20 

Dates sold: 19 July 2023 to 10 August 2023

Defect:

The product was sold without the warning information that is required for products containing button/coin batteries.

Hazard:

There is a risk of choking, severe internal burn injuries or death to young children if they gain access to the button batteries and swallow or insert them. Consumers may be unaware that the product contains a button battery.

What should I do?

Consumers should immediately place the product out of reach of children.
Consumers should return the product to Bunnings for a full refund.

For further information: 

For more information, please call 1300 804 213 or email Gardena.au@husqvarnagroup.com

Identification:

• Product Name:1.2L Drano ® Max Gel 1.2L
• Product Identifier: SKU/FERT 318263
• Dates sold: April - June 2023

Defect:

The cap on one batch of bottles may not seal the bottle properly and may permit product leakage. If present, leakage may be found near the cap and on the outside of the bottle.

Hazard:

The product is corrosive; wear gloves while handling. If the bottle tips over, and the cap fails to seal the bottle properly, the bottle may leak its corrosive contents. Direct contact with the contents may cause severe burns to eyes, skin, and/or mucous membranes and the contents may be harmful if ingested or inhaled. Young children or pets may come into contact with or ingest its contents, which are corrosive.

What should I do?

Visit our website at DranoMaxGelRecallAU.com for information about the recall and what you need to do. There, you will be asked to provide the UPC and Batch codes of your product to determine if this recall affects you. If your bottle is recalled, you should immediately stop using the product and follow the instructions on the website to safely dispose of the product and to request a full refund.

For further information:

If you have any questions about the recall or have more than 1 bottle of affected product, please email, or call us for additional assistance or visit the recall website at Recall (dranomaxgelrecallau.com)

Contact Us | SC Johnson (scjbrands.com) Tel: 1-800-801-869; 9am to 6pm Monday to Friday.

Identification:

Affected Batch Codes:

KJT082101 KJT082102 KJT082103 KJT082104 KJT082105

KJT092101 KJT092102 KJT092103 KJT092104

KTJ0922

KGT0521 KGT0921 KGT1020 KGT1021

Affected products can be identified by the batch code included on the product label.

Dates Sold: 25 December 2021 – 25 April 2023

Defect:

The product does not comply with the mandatory standard for trolley jacks. Warning notice labelling does not include the full key warning that the product is to be used on flat, hard, level ground.

Hazard:

There is a risk of a vehicle collapsing on a consumer causing serious injury or death from incorrect product use, due to incomplete warning labelling.

What should I do?

1. Consumers should stop using the hydraulic trolley jack immediately and check their product label for the affected batch codes.

2. Affected consumers should contact Kincrome to arrange to receive a permanent label that they can affix or return of the product for a replacement.

For further information Please contact Kincrome Australia Pty Ltd: by phone 1300 657 528 or email enquiries@kincrome.com.au

Identification:

Energizer Alkaline Battery A76 4pack Miniature Alkaline/Watch button batteries 1.5 Volt Barcode 8888021306835

Defect:

The product does not comply with the mandatory information standard for products containing button/coin batteries. The required warning symbol to advise consumers to keep out of children’s reach is not visible as it has been covered by a sticker on the back of the product’s packaging.

Hazard:

There is a risk of serious injury if the battery is swallowed or inserted in the body.

What should I do?

Consumers should immediately place the batteries out of reach of children and email Energizer at: A76compliance@energizer.com to arrange a compliant warning label to be sent out.

For further information Please contact us on: A76compliance@energizer.com

Identification:

DeWALT Fiberglass Sledgehammers with model numbers:

DWHT56024, DWHT56025, DWHT56026, DWHT56027, DWHT56029, DWHT56030, DWHT56141, DWHT56142, DWHT56147, DWHT56148

STANLEY FATMAX Fiberglass Sledgehammers with model numbers:

FMHT56006, FMHT56008, FMHT56009, FMHT56010, FMHT56011, FMHT56019

Dates sold: 4 August 2014 to 30 May 2023

Defect:

The head of the sledgehammer may loosen prematurely and detach unexpectedly during use.

Hazard:

There is a risk of injury to the user or bystanders if the head detaches during use.

What should I do?

Consumers should immediately cease using the product. Consumers should visit https://www.sledgehammerrecall.expertinquiry.com/ to register for a refund and obtain information about disposing of the product

For further information:

Please call 1800 338 002 or visit https://www.sledgehammerrecall.expertinquiry.com

Identification:

The model number IGP-2018 and batch number 2021/06 can be found on the information label on the generator. 36 affected generators were sold at Bunnings stores in WA between 1/12/2021 and 16/02/2022.

Defect:

The product does not comply with the Australian electrical safety standard. The neutral wiring of the socket outlet has been wired incorrectly.

Hazard:

Risk of electric shock, which can cause serious injury or death.

What should I do?

Consumers should stop using the product and return the product to Bunnings for a refund or replacement, or contact Ozito to arrange for the generator to be re-wired, free of charge. 

For further information: Please direct all calls and any queries concerning this recall to Ozito 1800 069 486 or email enquiries@ozito.com.au

Identification:

The issue may affect bottles with the following batch numbers purchased between November 2022 and January 2023 from various retail outlets:
AAA22790610, AAA22800710, AAA23191511, AAA23461212, AAA30111101

Defect:

Some bottles may have a faulty breather cap

Hazard:

The solution in some bottles may leak from the breather cap if tipped over. Contact with the solution may cause skin and/or eye damage and may be harmful if the contents are ingested or inhaled.

What should I do?

Wear protective clothing, gloves and face/eye protection and check that the breather cap is secured. If the cap is secure and there are no leaks, then read the instructions and use as directed. Store out of reach of children.

If you identify a leak, or are unsure, place the bottle upright in a plastic bag, seal with a cable tie or packaging tape and place in a secure container out of reach of children until collection can be arranged.

Wash hands thoroughly after handling even if a leak wasn’t obvious.

For further information: If medical advice is required, immediately call the Poisons Information Centre on 131126 or a Doctor

Contact 30 Seconds to arrange collection and a full refund of the affected bottles.

Identification:

Cabot’s Woodcare is recalling Enrich Timber Cleaner 2.2L (Batch SA36658) sold at Bunnings Warehouse between 12 January 2023 and 18 February 2023. The batch number can be found on a stick-on label on the base of the container.

Defect:

The container contents may leak from the screw top lid of the container. Leakage may be found around the screw top lid and on the outside of the container.

Hazard:

The contents of the container is corrosive. If the contents of the container comes into contact with the skin or eyes, it may cause severe skin burns or eye damage. If skin contact occurs, remove contaminated clothing and wash skin and clothing thoroughly. If eye contact occurs, hold eye open and flood with water for at least 15 minutes. If irritation occurs, seek medical advice.

What should I do?

Wearing appropriate PPE (long sleeve shirt, pants, apron, closed shoes, nitrile rubber gloves and safety glasses), you should:
(a) carefully inspect the container to identify any leakage around the screw top lid and on the outside of the container; and
(b) if leakage is identified, carefully tighten the screw top lid, wipe the leakage away with a rag and immediately dispose of the rag.
Alternately and if you prefer, please contact our customer service team 1800 011 006 or woodcareassisst@cabots.com.au, and we’ll arrange to collect the container and provide a refund.

For further information

If you’ve come into contact with the container contents without appropriate PPE, please call Dulux Emergency Response Service 1800 033 111 or seek medical advice. Otherwise and for any other query or question, please contact our customer service team 1800 011 006 or woodcareassisst@cabots.com.au.

See recall here

Identification:

All units marked with the following batch numbers are covered by this recall. The batch number label is located near the air intake vent.The product was sold through Bunnings stores nationally between February 2009 and March 2015.

Affected batch numbers include:

• 0901A, 0901C, 0903E, 0905C, 0906D, 0907D, 0908D
• 1003, 1008, 1009, 1010, 1011, 1012
• 1102, 1103, 1104, 1105, 1107, 1108, 1109, 1111, 1112
• 1202, 1204, 1205, 1206, 1207, 1208, 1209, 1211, 1212

Defect:

The impeller can break during use and rupture the casing, giving access to live parts and releasing sharp objects at high speed.

Hazard:

The defect poses a risk of electric shock and/or injuries from sharp objects at high speed. The defect has occurred and caused a number of injuries to consumers.

What should I do?

Stop using the blower immediately and unplug it from the socket.

Contact Ozito on 1800 069 486 for Australia or 0508 069 486 for New Zealand to obtain a reference number for a replacement blower or full refund.
For further information on this recall, contact Ozito by email at enquiries@ozito.com.au, or download the flyer.

Identification:

The recall covers the output connector clamp of the Projecta battery chargers which were sold at hardware and automotive parts retailers between 2017 and 2022. Only Models AC008, AC015, AC040, AC080, SMC150, SMC400, SMC800 are affected.

The output connector clamps that have a visible engraved ‘Vo’ or yellow paint dot, are not part of this recall.

Defect:

The plastic covers on the output connector clamps are not adequately resistant to fire. They may overheat and catch fire.

Hazard:

Risk of fire or burns causing serious injury.

What should I do?

Stop using the affected output connector clamps immediately.

For further information please Please visit the website https://www.projecta.com.au/technical-support/component-replacement-campaign for further information and to register your details to receive replacement clamps..

Identification:

The Roxy Glass logo pictured is on all affected glass panels but may be covered by timber trim and not visible on some affected doors. Major suppliers were Henley Properties, Porter Davis, IHG, Bunnings, Dahlsens Building Centre, Rawson Homes, Carlisle Homes and Clarendon homes.

Defect:

Certain glass doors installed from approximately October 2019 to February 2022 may not be toughened correctly and may not shatter according to the requirements of the Australian toughened glass safety standards.

Hazard:

Certain glass doors installed from approximately October 2019 to February 2022 may not be toughened correctly and may not shatter according to the requirements of the Australian toughened glass safety standards.

What should I do?

Some consumers will receive a letter between December 2022 and January 2023 from Corinthian Doors, their retailer or installer arranging for repair of their affected doors. Consumers who have not received a letter but have a clear glass door with timber trim (see example photos above) should visit the below Corinthian Doors recall webpage and follow the instructions to identify if your doors are affected.

All affected doors will be repaired at no cost. A clear film will be applied which prevents the glass from breaking unsafely into fragments or shards..

CONTACT DETAILS

For more information, or if you are in doubt, please visit Corinthian Doors' recall webpage at www.corinthian.com.au or contact Corinthian on CorinthianCS@corinthian.com.au or 1300 899 153 for further details.

Identification:

Dulux is recalling Concrete & Paving Bare Concrete Etch & Clean 2L and 4L products sold at Bunnings Warehouse during January 2023 SKU codes: 52ZD0198-2L ,52ZD0198-4L, Batch numbers 9988 Nov 2022 and 9990 Nov 2022 (2L), and 9968 Oct 2022 and 9978 Nov 2022 (4L). The batch number is printed on a stick on label on the base of the container.

Defect:

Movement during transport may have resulted in the product escaping through the seal of the screw top lids and dribbling down the container. Contamination may be found on the top or sides of the container.

Hazard:

Risk of fire or burn injury.

What should I do?

Consumers should wear PPE (long sleeves and pants, apron, closed shoes, nitrile rubber gloves and safety glasses) and carefully inspect the container for signs of product contamination. Any contamination can be carefully wiped away and the rag disposed of safely. Alternately, if you prefer a refund, please call Dulux Emergency Response Service 1800 033 111 to organise product pick up and refund.

For further information

For further advice, consumers can contact Dulux Emergency Response Service: Australia - 1800 033 111, New Zealand: 0800 734 607

Identification:

The gate motor assembly is mounted on a metal frame and has a plastic housing covering the motor and electrical components. It does not state the model number on it but visually looks like the one shown above.

Sold between 01/11/2017 and 30/09/2022 at Bunnings, Richmond Wheel & Castor Co and AdMerch. This recall does not affect any other models.

Defect:

The main supply cord may be incorrectly wired to the power terminal block

Hazard:

Risk of electrical shock causing serious injury or death

What should I do?

Consumers should open their gate and immediately stop use of the GTR156 powered gate opener and unplug it from the power supply.

Consumers should visit the Richmond Wheel and Castor Co website at https://www.richmondau.com/gtr156-safety-check/ to access and download instructions on how to operate their gate manually and what steps to take to confirm if their gate motor is affected.

Consumers can obtain assistance in identifying if their gate motor is affected by this recall, by uploading pictures of their gate motor at https://www.richmondau.com/gtr156-safety-check/ and following the instructions as directed. A service technician will contact you once they have reviewed the images provided.

Richmond Wheel & Castor Co will respond to all consumers to confirm if their gate motor is affected or not. If affected arrangements will be made for a technician to visit consumers and carry out the necessary, repair onsite.

For further information, please contact Richmond Wheel & Castor Co by phone on 1300 474 246, email at gatesupport@richmondau.com or via the website https://www.richmondau.com

Identification:

Affected Evergreen Garden Care Roundup Weedkillers:

Product description	APVMA registration number	APVMA approved label number	Batch number(s)
Roundup P Weedkiller	60737	127988	AAC2G6115, AAC2D5831, AAC2F6032
Roundup T Weedkiller	66732	112648	AAC2H6127, AAC2H6125, AAC1K5145, AAC2F6010, AAC2F6011
Roundup F Weedkiller	60737	127986	AAC2B5550, AAC2E5860, AAC2F5973, AAC2G6035

The units were sold between 1st March 2022 and 16thSeptember 2022 at Bunnings Stores

Defect:

Due to packaging damage, there is a risk that the user may be exposed to the contents of the product. .

Hazard:

Exposure to the product has the potential to cause serious eye irritation.

What should I do?

Consumers should stop using the affected product. If you are in possession of a damaged container of product please contact the Evergreen Garden Care Consumer Advice Line on 1800 635 797.

Please direct all calls and any queries concerning this voluntary recall to the Consumer Advice Line on 1800 635 797 or download flyer.

Identification:

Electrical approval number: SDC00603

SKU: 21001/05

Other identifying numbers
Batch numbers: VR2821, VR3821

Defect:

The light's LED components could overheat causing the housing to distort, melt or ignite.

Hazard:

The product may ignite and catch on fire causing serious injuries, death or property damage.

What should I do?

1. If the product is connected by a plug, remove it and return the product to the nearest Bunnings Store for a refund.

2. If the product is hardwired and requires an Electrician to remove it, contact Brilliant Lighting to make arrangements for a service call to remove and replace the product with a similar fixture or to provide a refund.

For further information, contact Brilliant Lighting by phone on 1800 879 625 (Monday to Friday, 9am-5pm) , email at support@brilliantlighting.com.au or visit

Identification:

Affected heaters are branded Mill and identified by:

Colour	White	Black
Model number on unit	AU SG2000LED	AU SG2000LED BK
Bunnings Item Number	0289325	0289326

The units were sold between 5^th  July 2021 and 20^th July 2022 at Bunnings Stores

Defect:

The supply cord is inadequately anchored to the appliance and if pulled it may become detached from the unit or become loose.

Hazard:

Risk of fire or electric shock causing serious injury or death.

What should I do?

Consumers should immediately stop using the product and unplug it from the power point. Return the product to any Bunnings store for a full refund.

For further information, please contact Arlec Australia Pty Ltd by phone on 03 9982 5111 or email custservice@arlec.com.au

Identification:

Model No: GRTD0345 - White Nylon Snatch Straps 9m x75mm x 8,000kg

Model No: GRTD0351 - Green Polyester Recovery Straps 9m x 75mm x 10,000kg

Sold at Bunnings between 1st December 2019 and 11th May 2022.

Defect:

The products do not comply with the mandatory standard for recovery straps for motor vehicles. The products do not have the required warning labels.

Hazard:

Recovery straps without the required safety warning label may be used incorrectly. There is an increased risk of injury or death if recovery straps are used incorrectly.

What should I do?

Consumers should immediately stop using the product and check the model number, which can be found on the blue sewn in label attached to each strap.

Affected consumers should contact Homewares Pty Ltd, including the below information, to register for a replacement warning label and instructions, these will be sent directly to consumers by post.
Consumers should email salessupport@myhomewares.com and include their full name, address, daytime telephone number, number of affected straps and the model numbers.

For more information, consumers can contact Homewares Pty Ltd by phone on 1800 620 500 (Monday to Friday 9:00am – 4:00pm AEST) or download the flyer.

Models DHS780 and DWS780-XE

Type Number 21

Production Date Codes between 2019-33 and 2022-06

Sold between September 2019 and July 2022

Defect:

The plastic rear guard could break or come off and hit the saw blade.

Hazard:

If the plastic rear guard hits the rotating saw blade, fragments of the guard may hit the user or bystanders, causing injury.

What should I do?

Immediately stop using the product. Check the model, type number and date code to determine whether the product is impacted. If so, contact DeWalt Customer Service Team to receive a free repair kit.

The repair kit includes a new rear guard and dust deflector assembly, two new fixing screws and instructions.

Repair instructions can be found at https://sbd.hubs.vidyard.com/watch/CPmqTr1Rd5vyJSbVTU1k9N?

For further information, contact DeWalt Customer Service on 1800 338 002 or email auorders@sbdinc.com

Identification:

The products being recalled have a Batch No. on the back of the unit. See illustration above. The affected batch numbers are as follows:

• 13119301120
• 13095301020
• 13046300820

If your power board does not have one of the above batch numbers, no further action is required, and you can continue using your power board as normal.

Defect:

The black on/off switch cover may break and separate from the product, exposing live parts.

Hazard:

This may result in live parts being exposed and a risk of electrical shock.

What should I do?

Consumers must immediately stop using the product and return to Bunnings Store for a full refund.

For further information, please Download the flyer, or contact BWES by email on recalls@bwes.com.au.

Affected Batch Numbers:
Model no. A003, Affected BBQ Burner - Jumbuck Stardom Model No. HS-884502 were sold through Bunnings from 5th August 2019 to 23rd January 2020. Please click here for more information. 

Hazard:
Risk of leaking gas at the connection with an LPG cylinder could lead to burns and/or a fire, and/or explosion which may result in serious injury.

What should you do?
Consumers should immediately turn off the gas supply and disconnect the hose assembly from the LPG cylinder. Check the date of purchase and the month and year of manufacture of their BBQ - if in range - do not use the BBQ and contact Pacific Gas & Heating on 1300 793 978 to receive instructions on how to disconnect the hose assembly from the BBQ. Consumers can either:
1. Request Pacific Gas & Heating to mail a replacement hose assembly to their home address.
2. Take the hose assembly to any Bunnings store to receive a replacement hose assembly.
For further information, contact Pacific Gas & Heating on 1300 793 978 or email us at info@pacificgas.com.au.

Identification:

This recall covers NCVT-1 products bearing a date code ending in H7, which can be found on the side of the NCVT-1 opposite the clip.

The affected items were sold between September 2020 - April 2021.

Defect:

The tip of the tool remains illuminated in green when the on/off button is depressed.

Hazard:

If the button remains depressed during the power on or power off cycle, the tip of the tool remains illuminated in green, indicating the tool is “ready to detect voltage,” when it is not.

What should I do?

Consumers should immediately stop using the voltage tester and return the item to their nearest Bunnings for a full refund.

For further information please download the flyer or contact Klein Tools Australia on 1800 553 468 or email return@kleintools.com.au.

Identification:

750mL ready to use trigger spray bottle (Product code BC36RTU-750M)

950mL concentrate bottle (Product code BC36-950M)

4L concentrate bottle (Product code BC36-4L)

Defect:

Product can leak from the cap of the bottle.

Hazard:

If the product leaks from the packaging, it may cause skin and/or eye irritation and damage/corrode property.

What should I do?

Consumers are advised to immediately stop using the product. Consumers should return the product to the place of purchase for a full refund.

When handling the product, consumers should wear gloves and eye protection. Check the container’s cap is sufficiently tightened and not damaged. Check the packaging container for any leaks or damage.

Consumers are advised to place the affected product in a plastic bag secured with a cable tie and exercise caution when transporting the affected product to the place of purchase for a full refund.

Consumers should thoroughly wash their hands after handling the product, even if there is no obvious sign of leakage.

For further information please download the flyer or consumers can contact ITW Australia by phone on 1800 177 989 or by email at sales@aamtech.com.au.

Identification:

The Sidchrome 2000kg Hydraulic Trolley Jack (SCMT81002) was sold through Bunnings stores and online between 01/10/2019 – 01/12/2020.

Defect:

Potential fault in the hydraulic cylinder which may cause the trolley jack to fail.

Hazard:

If the defect occurs whilst in use, the trolley jack can collapse causing serious injury or death to the user and may result in property damage.

What should I do?

Consumers must immediately stop using the trolley jack and return it to their nearest Bunnings store to receive a full refund.

For further information, please download the flyer. You can contact Stanley Black & Decker by calling 1800 338 002 during 9:00am - 5:00pm Monday to Friday or email: anzcustfeedback@sbdinc.com.

Identification:

The Ring Video Doorbell Gen 2 was sold between 3/06/2020 and 07/09/2020.

Impacted units include part numbers 8VR1SZ-SEN0 and 8VR1SZ-VEN0

Defect:

If the incorrect screws are used to install the video doorbell to the mounting bracket, the screws can damage the lithium battery.

Hazard:

If the lithium battery is damaged during installation, there is a risk of a fire or injury.

What should I do?

Consumers with uninstalled Ring Video Doorbells (2nd Gen) subject to the Recall should visit Ring’s website to download a new user guide before installing their doorbell or contact Ring as indicated below for additional information.

All known customers have been contacted by the manufacturer. In-app set-up instructions have also been updated.

Consumers can check the Ring website to determine whether they have purchased a Ring Video Doorbell (2nd Gen) subject to the recall.

For more information about this product recall, please download the flyer.

Identification:

The products were sold through Bunnings stores nationally between October 2017 to July 2020.

Defect:

The resin filling on the pump does not completely cover wiring. Water will make contact with the pumps main connection.

Hazard:

When water makes contact with the pumps main connection, the device is likely to conduct an electric current to the water causing electric shock or electrocution which can lead to serious injury or death.

What should I do?

Consumers should stop using pump immediately and return them to their nearest Bunnings store for a replacement product.

For further information, please download the flyer or contact Chemkay by phone on 1300 278 283 or email productrecall@aquatecequipment.com.

Identification:

The products were sold through Bunnings stores nationally between 1st August 2019 and 27th July 2020.

Defect:

The child restraint cap may not be properly tightened, which may mean the lids are loose and may come off if the bottle is picked up by the lid. If the lid comes loose and the secondary seal bursts, there is a risk that the user may come into contact with the contents of the product.

Hazard:

Exposure to the product may damage the eyes and irritate the throat, hands or skin.

What should I do?

Consumers should check any product in their possession to ensure that the lid has been tightened and is secure.

For further information, please download the flyer or contact Richgro Garden Products by phone on 1800 455 132.

Identification:

This product was sold through Bunnings stores nationally between 6 August 2020 and 21 August 2020.

Defect:

The user manual containing operating and safety instructions for the drill has not been included with the drill in the kit.

Hazard:

The hammer drill kit does not include a safety instruction manual. The drill may be misused and this may result in an increased risk of severe injury.

What should I do?

Consumers should contact Bosch to request a copy of the user manual.

For further information, please download the flyer, or contact Robert Bosch (Australia) Pty Ltd on 1300 307 044, or email CustomerService.PT@au.bosch.com.

Identification:

The product was sold through Bunnings stores nationally between 1 March 2019 and 24 July 2020.

Defect:

Steel toe cap may be missing in some boots.

Hazard:

If the steep cap is missing, the boots will not protect the toes from being crushed by heavy objects landing on the foot.

What should I do?

Consumers should inspect their boots to check if they have the steel toe caps. This can be done by pressing down on the ribbed toe guard at the front of each boot. If the steep cap is absent, the toe of the boot will compress. If the steel cap is missing, contact Mayo Hardware to arrange for the boots to be returned and replaced.

For further information, please download the flyer or contact Mayo Hardware on 1300 360 211 or email dewalt@mayohardware.com.au

Identification:

All ASG-7000 units marked with the following batch numbers are covered by this recall.

The batch number is located on the side of the product (on the rating label). The product was sold through Bunnings stores nationally between June 2018 and May 2020.

Affected batch numbers include: 2018/05, 2018/06, 2018/07, 2018/09, 2019/01, 2019/03, 2019/04, 2019/07, 2019/09, 2019/10, 2019/11, 2019/12.

Defect:

A manufacturing defect may cause paint to enter into the internal components of the pressure adjustment dial's electric switch, causing some external metal parts of the sprayer to become live.

Hazard:

Risk of Electric Shock

What should I do?

Immediately stop using the paint sprayer. Check the model number and batch number of the paint sprayer to identify if the product is recalled product.

If so, contact Ozito on 1800069486 and return the product to your nearest Bunnings store for a refund.

For more information about this product recall, download the flyer.

Identification:

The Model Number and Serial Number are located on Compliance Plate on the back the pellet fire. The Item Number is located on product carton. Affected products have Model Number SCPH02, Item Number 317153 and Serial Numbers SCPH02-XX-YYYY, where X and Y may be any number. Please check this reference for more information.

Defect:

The screws that hold the controller in place, forming part of the earth connection, could become loose. This may allow the earth connection to break which will affect the electrical safety of the pellet heater.

Hazard:

Risk of electric shock.

What should I do?

Stop using the heater immediately. Turn off the power at the wall and disconnect the plug. Contact Scandia to assess if an on-site inspection and repair is necessary.

Please contact Scandia Service on (03) 8579 5911 (8am-4pm AEDT Mon-Fri), or email verdant@scandiagroup.com.au.

Identification:

Check for unit identification details – Model No., Batch Code and OLN Code - on the rating label located on side of the front panel. Affected heaters have Model No. MNDB1M-III, Batch Code 12/15 and OLN 9129 and were sold through Bunnings from 24 February 2016 to 3 May 2017. Please check this reference for more information.

Defect:

A potential manufacturing defect may cause the heater control panel to overheat, and in some cases to melt and catch on fire.

Hazard:

Risk of fire.

What should I do?

Stop using the heater immediately and return it to the nearest Bunnings store as soon as possible for a full refund.

For any further information, please contact the Yale Prima Call Centre on 1300 366 155 in Australia.

Identification:

This recall affects Moretti fan heaters (model number FH-2000) sold at Bunnings from 10/04/17 to 05/06/17. Please click here for more information.

Defect:

The base of the heater may overheat and deform due to an internal fault.

Hazard:

Risk of burning and electric shock.

What should I do?

Customers should stop using the product immediately and return it to their nearest Bunnings store for a full refund. For further information, please call Tempo Customer Helpline on 1300 886 649 or send an email to info@tempo.org.

Identification:

Bunnings is issuing a recall of all Moretti and Click oil column heaters purchased in 2017. This is a precautionary measure following the recall of the Moretti 5 Fin and Moretti 11 Fin Oil Column Heaters.

Defect:

The Moretti 5 Fin and 11 Fin Oil Column Heaters were recalled following reports from a number of customers of oil having leaked and in some instances sprayed. While to date we have not had similar incidents reported with any other oil column heaters under the Moretti and Click brands, additional testing by suppliers suggests an incorrect specification of oil could have been used in some of the heaters.  It is important to reinforce that this is preliminary information from our suppliers and we are undertaking additional testing as we continue to investigate the cause of the issues.

Hazard:

These heaters could rupture when turned on and allow hot oil to spray out, with the potential to cause scalding and burns.

What should I do?

We urge customers to stop using these heaters immediately and return them to your nearest Bunnings store for a full refund. The safety of customers and our team is our top priority and we encourage customers to call 1800 797 586 to report any concerns.

Identification:

The following models:

• 7 Fin Oil Column Heater, Model No. YL-B12-7, F/L: 4441744, Batch Code: 10538
• 1000W 5 Fin Oil Column Heater, Model No. MO-WWM6-5, F/L: 4441771, Batch Code: 12/16
• 1500W 7 Fin Oil Column Heater, Model No. MO-WWM6-7, F/L: 4441773, Batch Code: 12/16
• 2400W 11 Fin Oil Column Heater, Model No. MO-WWM6-11T, F/L: 4441774. Batch Code: 12/16
• 1 Retro 11 Fin Oil Heater, Model No. RWOF-11T, F/L: 4441743, Batch Code: 10554
• 11 Fin Oil Column Heater, Model No. MC35B2, F/L: 4441019, Batch Code: 12/16
• 11 Fin LCD Oil Column Heater, Model No. OFH-11LCD, F/L: 4441977, Batch Code: 10619

Check for model Identification details – Model No. & Batch Code – on the rating label located on unit.

Defect:

A manufacturing defect may cause hot oil to leak from heater.

Hazard:

The oil may cause scalding and burns.

What should I do?

Stop using these heaters immediately and return to any Bunnings Store for a full refund. For further information please call 1800 797 586 or locate your nearest Bunnings store.

1000W 5 Fin Oil Column Heater, Model No. CDFP3-5, F/L: 4441770, Batch Code: 12/16

Identification:
Check for model Identification details – Model No. & Batch Code – on the rating label located on unit.

What are the defects?
Recalling this product due to potential safety hazard. A manufacturing defect may cause hot oil to leak from heater. The oil may cause scalding and burns

What should you do?
Stop using these heaters immediately and return to any Bunnings Store for a full refund. For further information please call 1800 797 586 or go to www.bunnings.com.au to locate your nearest Bunnings store.

earest Bunnings store.

 

Identification:

Heller 2000W Fan Heater, model FHH20A, with batch code 0514. These heaters were supplied from April 2014 to November 2014 by Bunnings. The rating label is located at the base of the heater.

Defect:

A manufacturing defect may cause hot oil to leak from heater.

Hazard:

The oil may cause scalding and burns.

What should I do?

Stop using these heaters immediately and return to any Bunnings Store for a full refund. For further information please call 1800 797 586 or locate your nearest Bunnings store.

Identification:

Barcode: 9310168506919

Only 250mL cans sold after 1 December 2018 and with a batch number that starts with 9 are affected. The batch number is a four digit number printed on the top of the can. Please click here for more information

Defect:

The neck on the spout of the can may separate from the body, resulting in the product leaking out.

Hazard:

If the product container comes apart at the neck during handling, it may spill and come into contact with the skin or eyes of the user, causing irritation. First aid instructions are provided on the can, and advise flushing with water for several minutes.

What should I do?

Consumers should put on latex or rubber gloves and check the batch number of any Poly Paint Stripper 250mL cans they have, to see if the batch number starts with 9. The batch number contains 4 digits and is printed on the top of the can.

If the batch number starts with a 9, still wearing the gloves, tape the lid to the can with duct tape or other similar tape, place the can in a plastic bag and in a box or carton in an upright position. Transport the can in the upright position to the nearest Bunnings store for a full refund.

For further information, contact Poly Customer Service on 1300 133 701 or by email at support.poly@polyrotacota.com.au.

What should I do?

Consumers are asked to please return any Callisia ‘Pink Lady’ plants purchased from Bunnings stores. Customers will be provided a full refund.

If you require further information on this plant species, please call DPIRD’s Pest and Disease Information Service on: 9368 3080.

Identification:

Batch numbers above 826. The batch number is on the underside (bottom) of the can. Please click here for more information. 

Defect:

Some cans may have been damaged prior to purchase, during storage and handling. If damaged, the pressurised can may rupture and expel its contents. Only cans damaged prior to purchase are recalled.

Hazard:

If a damaged can ruptures, the product may leak out, posing a risk of impact injury from the can itself and/or skin and/or eye irritation from the contents.

What should I do?

Consumers should gently inspect the can for deep scratches, indentations and/or puncture holes (see sample photos of damage here). If the can has any such damage, consumers should not use it, and should handle it with care to avoid rupture (wrap it in paper, double bag it and do not drop) and return it to the place of purchase for a full refund or exchange.

For further information please Poly Customer Service on 1300 133 701 or by email at support.poly@polyrotacota.com.au.

Identification:

Batch numbers above 818. Please click here for more information.

Defect:

Some cans may have been damaged prior to purchase, during storage and handling. If damaged, the pressurised can may rupture and expel its contents. Only cans damaged prior to purchase are recalled.

Hazard:

If a damaged can ruptures, the product may leak out, posing a risk of impact injury from the can itself and/or skin and/or eye irritation from the contents.

What should I do?

Consumers should gently inspect the can for deep scratches, indentations and/or puncture holes (see sample photos of damage here). If the can has any such damage, consumers should not use it, and should handle it with care to avoid rupture (wrap it in paper, double bag it and do not drop) and return it to the place of purchase for a full refund or exchange.

For further information please Selleys Customer Service on 1300 555 205 or by email at Support.selleysau@selleys.com.

Identification:

The affected batch number is 37896. Please click here for more information.

Defect:

Potential deformation and over-pressurisation of the can and its contents.

Hazard:

Risk of injury, the cans may over-pressurise causing deformation and at worst case randomly burst, causing the users to come into contact with the product and potentially projecting components.

What should I do?

Cease product use immediately and isolate in a cool well-ventilated safe area away from direct sunlight or heat sources. Ensure that appropriate personal protective equipment, eye protection, face protection and full length clothing is worn if handling.

For more information, please contact Dy-Mark Customer Service on 1300 396 275, email sales@dymark.com.au or visit the Dy-Mark website.

Identification:

SafeTech Hardware Australia Pty Ltd wishes to advise of a recall for the lock striker component of key lockable gate latches used within the following products:

• SafeTech Top Pull Pool Gate Latch (Key Lockable)
• G8Safe Top Pull Pool Gate Latch (Key Lockable)
• SafeTech TriLatch (Key Lockable)
• G8Safe TriLatch (Key Lockable)

These products are also purchasable as part of the following kits:

• SafeTech Trade Packs (Key Lockable)
• G8Safe Megapack (Key Lockable)

Please check this guide for more information.

Defect:

The products do not comply with Australian Standard AS1926.1 2012 Safety Barriers for Swimming Pools section 2.4.2.1 (b). If the gate is open, turning the key in the striker component of the gate latch may cause the gate to remain locked in the open position.

Hazard:

If the gate latch remains locked in the open position, it will not prevent unsupervised access to the pool area, posing a potential drowning risk.

What should I do?

Consumers should immediately disable the key lock mechanism by removing the key from the striker or fill in the key hole with a waterproof adhesive. Consumers should register their details by phoning 1300 034 096 or visiting www.safetechhardware.com.au. Consumers will be offered either a keyless striker or a replacement lockable striker for the latch. The replacement product will come with "How to Change Your Striker" instructions. These instructions will also be available via www.safetechhardware.com.au. It is important to note that disabling the key mechanism will not affect your existing pool compliance status or its ability to latch and secure the gate.

For more information, please hone SafeTech Hardware on 1300 034 096 or visit www.safetechhardware.com.au.

Identification:

TV wall mounting bracket where: Two metal disks are attached to the wall; the black plastic pieces are attached to the TV, then the TV is hung on the disks via the wire. The affected products can be identified as pictured (with white ‘Click’ logo sticker). They were sold through Bunnings from 05 August 2012 to 17 March 2017. Please check this guide for more information.

Defect:

The plastic mounts at either end of the wire may fail, resulting in the wire detaching from the mount.A television hooked on the wall bracket may fall from the wall, posing a risk of serious injury.

What should I do?

Contact Yale Prima to discuss replacement of the wall bracket or alternatively return the product to any Bunnings store for a refund.

For any further information, please contact the Yale Prima Call Centre on 1300 366 155 in Australia  9am – 5 pm EST (Mon-Fri) or email to support@yaleprima.com.au.

Identification:

This recall affects Makita Line Trimmer and Brushcutters (Model Numbers ER2600L, EM2600L, EM2600U) sold at Bunnings between January 2016 and September 2017. Please check this guide for more information.

Defect:

The fuel tank seal and fuel lines may leak petrol.

What should I do?

Check the model and production date of your brushcutter and line trimmer (see affected range of serial numbers above). If the model and production date of your brushcutter is within the affected range, stop using it immediately and carefully drain the fuel tank. Take your trimmer into the store you bought it from or to a nearest Makita Authorised Service Agent. Makita will arrange free of charge replacement of the fuel tank seal and fuel lines.

Hazard:

Customers may be at risk if the instructions "USE OUTDOORS" are not adhered to and the appliance is used on the lowest possible heat output in a confined space.

What should I do?

Customers should stop using the product immediately, and may contact Sitro to obtain an alternative unit. For further information, please call Sitro Customer Service Line on 1300 174 876 or send an email to productsafety@sitro.com.au.

Identification:

This recall affects products bought between December 2016 and February 2017, with a batch code of 09/16 and a marked approval number of TUV021351EA. Please check this guide for more information.

Defect:

The plastic enclosure does not meet the flammability requirement of the applicable Australian Standard.

Hazard:

Risk of fire.

What should I do?

If your product is affected, you should stop using it immediately by switching off the power at the socket outlet and return it to any Bunnings store for a full refund.

Identification:

RYOBI Petrol Line Trimmer/Brush Cutter: RBC254FSDSN, RBC254FSBSN, ABCLT04G

Homelite Petrol Line Trimmer/Brush Cutter: HBC25SJSN

Dates available for sale: 1 September 2013 - 22 April 2016

Defect:

If the nut securing the blade is not properly tightened before use, in accordance with the instructions, the blade may detach.

Hazard:

If the blade detaches during use, this poses a risk of laceration to the user.

What should I do?

Consumers should immediately stop using the blade attachment and contact Techtronic Industries Australia Pty Limited to either:

• Return the product (as a whole) for a refund of the full purchase price of the product; or
• Return the blade (only) for a refund of the full retail price of the blade.

Contact Techtronic Industries Australia Pty Limited's product service on 1300 361 505 or email info@ryobi.com.au.

Identification:

• 67986 Ceramic springs
• 67989 Cascading urns
• 67981 Ceramic water jar
• 67983 Lily 4 tier

(Note: product code is on boxes, not products)

Please check this guide for more information.

Defect:

The body of the transformer may be cracked, potentially exposing live parts.

Hazard:

Risk of electric shock.

What should I do?

Switch the power off at the socket outlet and unplug the transformer. Consumers should contact Gardman Australia Pty Ltd for a replacement transformer.

For further information please direct all calls and any queries concerning this recall to Gardman on 03 9543 5600, email reception@brunnings.com.au or visit www.brunnings.com.au.