Project list
Sign in to your account
With project lists you can...
Please sign in or create an account to use Project Lists
Did you know you can install a home security system all by yourself? Most security systems are ready to go and designed to be as user-friendly as possible, allowing you to save money through D.I.Y. installation.
If you’re ready to take your home safety and security to the next level, follow our easy step-by-step guide.
Tip: Each security system may be a little different, so make sure to read the manufacturer’s instructions carefully.
Safety tip: Always wear the appropriate safety equipment (safety glasses, gloves, ear muffs and a mask, for example) and always follow the instructions for the product or equipment.
To connect your security system to Wi-Fi, start by switching on the homebase. Next, plug the provided ethernet cable into the homebase and plug the other end into your home router. The LED indicator will turn blue, signifying that your system is ready to be set up.
Once your system is connected to Wi-Fi, you’ll be able to connect to your wireless cameras using the system’s app. This is where you will operate and view live camera footage.
Download the app on your electronic device and follow the setup instructions to connect each camera.
A general rule of thumb is to install a camera above each entry and exit point, where you can monitor who comes in and out of your home. Also, consider where you’d like to place your cameras for the best field of view. This might depend on what you’d like to use your system for, whether it’s checking on pets, monitoring deliveries or added security.
It’s recommended to keep your cameras out of direct sunlight, two or three metres above the ground. This is so the image won’t be obstructed by sunlight and to ensure the camera can capture a broad view of its surroundings. The higher the camera, the more you’ll be able to see.
Visible security cameras are a proven deterrent to crime. However, you may also wish to consider areas that your cameras can be hidden from plain view, as well.
To check the signal strength, place your wireless camera close to where you wish to mount it. Open the security app on your phone and use the mounting guide function. If the signal is weak, you’ll need to reconsider your mounting location and move the camera to a place that’s closer to the homebase.
Mark the area where you’d like to mount the camera with a pencil and pre-drill the holes. Dismantle the mounting brackets by turning the bracket clockwise from the base.
Attach the base to the area by screwing it in where you pre-drilled the holes. Re-attach the mounting brackets. Now you're ready to attach the camera to the mounting bracket.
Repeat this step for as many cameras as you like around your home.
Once you’ve installed all your cameras, open the app. You’ll be able to view a live stream feed of all your cameras. From here, go back to each camera and adjust the viewing angle to ensure you’re getting a clear view of each area.
If you’ve chosen a trusty CCTV system (like the one used in our example), you’ll only need to charge your cameras twice a year.
To do this, simply unscrew each camera with a screwdriver and plug them into the charger. Allow them to charge before screwing them back into place.
Asbestos, lead-based paints and copper chromium arsenic (CCA) treated timber are health hazards you need to look out for when renovating older homes. These substances can easily be disturbed when renovating and exposure to them can cause a range of life-threatening diseases and conditions including cancer. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer or visit our Health & Safety page.
When following our advice in our D.I.Y. videos, make sure you use all equipment, including PPE, safely by following the manufacturer’s instructions. Check that the equipment is suitable for the task and that PPE fits properly. If you are unsure, hire an expert to do the job or talk to a Bunnings Team Member.
