- DIY construction to save time and money
- Made in Australia for domestic use only
- Includes 2 timber sides (stringers) and 12 stainless decking screws
- Treads are not included, 2 treads to be purchased separately
- Treads are grooved to comply with Australian Building Code 3.9.1.4 Slip Resistance
The Wilmaplex Ezistep range can be assembled quickly and easily with a power drill and a #10 (No.2) square attachment, ideal for when you need to build steps for your deck. The grooved treads are easily assembled as the stringers are routed in for secure and longer lasting construction.
The stairs are made from H3, LOSP Treated Pine, suitable for above ground outdoor use. Timber is a naturally occurring material which can have variations in colour and texture.
Possibility of sap leakage, therefore it is imperative to use an Oil based paint with primer. Speak to a team member in Paint to ensure you select the correct paint required for Treated Pine.
Due to weather climate differences Australia-wide, try and dry timber properly prior to painting for approximately 2 weeks.
Tread requirements: depth 240 x 45mm thick (purchased separately)
Tread Widths Available in 900mm, 1200mm, 1500mm and 1800mm
It is recommended by Australian Standards for any Tread Width over 1000mm to be fitted with a Centre Brace for extra support.
Deck to ground height: 480mm
Distance out from deck: 565mm
*Please check the deck to ground measurement prior to purchase. Stringers only; treads not included.
