COVID-19 Update
Providing our customers and the community access to products in a safe environment will always be a priority for us. Our stores and services might also look a little different during this time as we take some additional precautions, so we thank you for your patience.
Services can now be processed over the phone by contacting your local Bunnings store and speaking with the Special Orders team.
How it works
1. Purchase a compatible air conditioner unit and get it home.
2. Arrange installation at the Special Orders desk in-store.
3. A licensed installer will complete your installation.
Offer available at selected stores. To see if this service is available in your location please contact your local Bunnings.
How to choose
Before having your split system installed, you need to choose the most appropriate unit for your home. When selecting an air conditioner for your home consider the size and type of room it is going to be installed. Refer to the supplier brochures below to identify the best unit to suit your space.
What's included in the offer
Installation pricing is representative of a standard installation for a split system unit. Standard installation includes back-to-back installs with the price determined by the size of the unit and whether the installation is taking place on a single or double storey home. See below for what’s included in the standard installation price.
Standard single storey back-to-back split system installation
Standard back-to-back installation is a split system with two main components – a wall mounted indoor unit with an outdoor unit positioned directly below on a single storey dwelling.
This is what you get with a standard installation:
- Compliance and certification (mandatory in Vic & ACT)
- PVC ducting to conceal the pipe work and electrical connections
- Up to 20 metres of internal roof cable run (switchboard must be checked to have sufficient electrical capacity and room for another circuit)
- Weatherproof safety isolation switch mounted near outdoor unit
- Up to three metres of pipework between the head unit and the outdoor compressor unit
- Installation of RCS where necessary
- Where installation is non-standard or additional cable is required, additional charges may apply.
Standard double storey split system installation
A double storey installation is a split system with two main components – a wall mounted indoor unit that is mounted on the second storey of a dwelling and an outdoor unit mounted outside at ground level directly below the indoor unit. If mounting outside unit onto a wall, brackets are an additional cost.
Here’s what you get with a standard installation:
- Compliance and certification (Vic and ACT mandatory)
- Up to five metres of PVC ducting to conceal pipe work and electrical connections
- Up to 20 metres of internal roof cable run (switchboard must be checked to have sufficient electrical capacity and room for another circuit)
- Weatherproof safety isolation switch mounted near outdoor unit
- Up to five metres of pipe work between the head unit and the outdoor compressor unit
Frequently Asked Questions
See our frequently asked questions for more information about this offer.
Terms and Conditions
Bunnings Air Conditioner Installation Service can only be used with compatible air conditioner units as shown in-store or online, purchased from Bunnings. Excludes installations in commercial locations and apartment buildings. Only one install per installation booking. Multiple bookings required for multiple installations. Excess travel is charged when the customers home is further than 35km from the nearest store. Installation must be paid for prior to booking. ‘From’ pricing represents ‘standard’ installation of a single story 4KW and under air conditioner unit with back to back installation. ‘Non standard’ installation pricing will be based on your individual installation requirements. Click here to see our full terms and conditions.
For any additional information, please contact your local Bunnings.
Top of the content