Feast Watson 500ml Liming White Stain

Oil based, liming product which imparts a soft milky effect to the timber. PREPARATION How to prepare New Timber: Sand to a smooth surface and remove all sanding dust before coating. To achieve a super-smooth finish or if the timber grain is open or coarse, apply a coat of Feast Watson Sanding Sealer and sand back as per the directions. Note: For soft porous timbers such as Pine, Meranti and Cedar, seal with Feast Watson Timber Primer to ensure even absorption into the timber. How to prepare previously coated timber: If your timber has been previously coated, you need to sand back to bare timber to ensure the best results. Remember to remove all sanding dust before coating! APPLICATION Before you start applying, please note the following: Ensure the product has been thoroughly stirred through with a flat blade stirrer. Be careful not to introduce any bubbles! Make sure you love your colour! Using an off-cut or on a inconspicuous area, test the colour to ensure you are happy with your choice. Note that the dwell time before wiping excess, and the finishing clear coat will impact the final colour. How to limewash your timber: Let's get started! In the direction of the grain, apply Liming White with a brush or Feast Watson Floor Finish Applicator. Using a soft, clean cloth wipe off excess when your desired colour has been achieved (1-5 minutes). Leave to dry for 8 hours. Looking for a stronger colour? That's okay! Stronger colours can be developed with further coats of Liming White. Just follow the above procedure to achieve your wonderful colour. All done? Great! Now onto the protective coat. But remember, oil based top coats may cause the surface to yellow over time. Top Coating: Ensure Liming White is completely dry before applying. For interior floors, apply Feast Watson Floorseal Oil or Feast Watson Floorclear as per the label instructions. For all other interior timber (not floors) apply three coats of Feast Watson Clear Varnish as per label directions. Colour Tinting: Add up to 5% Prooftint to Liming White to create pastel tones. Add 50ml of Prooftint to a 1L can of Liming White. Apply the tinted mixture as per the above procedure. MAINTENANCE Let's maintain your wonderful colour: Floors Once Liming White has been top coated, use Feast Watson Floorclean is clean your floor. Use Feast Watson Mastertouch Polish to rejuvenate the surface and Feast Watson Floorshine to rejuvenate and extend the life of tired, worn floors coated with Floorclear or Floorseal Oil. Furniture To rejuvenate your interior furniture, polish sealed surfaces with Feast Watson Mastertouch Polish or buff with Feast Watson Fine Buffing Oil.