How to make a hallway console table

Think outside the box and use plumbing supplies to build a hallway console table. PVC pipe is lightweight but sturdy and easy to cut for slimline yet shapely legs. The top is a timber panel cut in half and joined with adhesive with the edges rounded over with a router to get a curved edge. The paint job is easy to do with spray paint that works on both plastic and timber with no need to prime.

Round over the edges with a router. Sand all over and wipe off dust. Spray two coats of white paint over the top and the sides, leaving to dry thoroughly after each coat. To mark the stripes, position evenly spaced strips of painter’s tape along the panel.

To make 10 table legs, measure and mark 700mm lengths of PVC pipe and cut with a handsaw. Sand the cut ends smooth and stand legs up on a drop sheet.

Apply several light coats of red spray paint to the legs until the desired depth of colour is achieved; let dry after each coat. Spray the tabletop stripes; let dry. Apply a second coat, remove tape and let dry. 

To make the base, join two rows of five legs together with construction adhesive; wrap with painter’s tape to hold until set. Use a 3mm bit to predrill and secure angle brackets, centred, at the top of each leg on both front and back; secure into the PVC with screws. Touch up the base with paint, covering brackets and any adhesive. Centre the tabletop on the base. From underneath, predrill through the brackets then secure with screws.

• When using power tools, always protect ears and eyes with ear muffs and safety glasses (gloves and mask are also recommended). 
• For sanding or spray painting, always wear the recommended safety gear (such as gloves, mask, and eye and ear protection). Follow the manufacturer’s instructions and work in a well-ventilated area, covering surrounding areas with a drop sheet to avoid overspray. 
• Keep all paint and chemicals out of reach of children and pets. 
• Paint colours may vary on application.  
  
   .