Cabot's 1L Jarrah Gloss Oil Based Stain And Varnish

Cabot's Stain and Oil Based Varnish is a penetrating stain ideal for use on interior doors, windows, trim and furniture. Available in both gloss and satin finishes, Cabot's Stain and Varnish Oil Based rejuvenates and transforms interior timber, whilst retraining the natural wood grain beneath. Preparation: Note: Fill nail holes, cracks and other defects with Cabot's Wood Tone Putty after applying the first coat of this product for accurate colour matching. Remove stains, dirt, wax, grease and oil with mineral turpentine. Remove any polish with a suitable floor polish remover. Bare Timber Sand the surface smooth using 180 - 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust. Previously Coated Timber Completely remove the previous coating using a paint stripper or by sanding. Remove all traces of sanding dust. Application: Note: Fill nail holes, cracks and other defects with Cabot's Wood Tone Putty after applying the first coat of this product for accurate colour matching. Remove stains, dirt, wax, grease and oil with mineral turpentine. Remove any polish with a suitable floor polish remover. Bare Timber Sand the surface smooth using 180 - 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust. Previously Coated Timber Completely remove the previous coating using a paint stripper or by sanding. Remove all traces of sanding dust. Maintenance: "Regular inspection of all coated surfaces is recommended. Re-coating is recommended when the coating looks dull or tired. 1. Clean with Cabot's Floor Clean following label instructions. 2. Sand with 240 grit sandpaper, remove all traces of sanding dust. 3. Apply 1-2 coats of Stain & Varnish.