Swamp bm-800 condenser microphone kit the bm-800 microphone home studio kit is easy to set up and includes everything needed for a pro quality recordings - broadcast stand, wind shield, pop filter, shockmount and a 48v phantom power supply is also included with this package to ensure you get the best possible quality from the bm-800 mic. This is an all-in-one package for plug and play home recording studio set up. Ideal for musicians, singers, podcasters and streamers alike. At swamp we have selected the bm-800 and the best accessories to offer an extremely affordable but great quality condenser microphone package that performs without the need for extra components and interfaces. Desktop broadcast stand the broadcast stand is easy to put together and allows for adjustments to position and you can rotate the microphone away from you if you aren’t using it. The shockmount hold the microphone tightly and helps keep a clean recording. The bottom of the clamp has padding to prevent damage. 48v phantom power supply pre-amp typically, large diaphragm condenser microphones are designed to run on 48v phantom power. However a 3.5mm mic input on a standard computer soundcard or smartphone, only outputs ~5v. If you plug the bm800 mic directly into a computer, it will often work. Though the sound quality is seriously compromised with a lack of recording volume clearly noticeable. Cheaper usb sound cards will also have similar problems, as again they often output only 5v. Note that small diaphragm condenser mics (clip on types) only require 5v phantom power, and are hence directly compatibly with 3.5mm inputs on smartphones and computers. The solution is to provide the full 48v of phantom power that the mic is designed to for, allowing the microphone capsule to operate at its full potential. Delivering you crisper, warmer and cleaner recordings. If you have purchased a bm800 from other sellers are are looking for a 48v phantom power supply we also sell them individually. Otherwise sit back and relax, the swamp bm-800 kit as everything you need to start recording or streaming like a pro. Package includes: 1x black bm-800 microphone 1x 48v phantom power supply (au plug adapter) 1x shock mount 1x wind shield / screen 1x microphone pop filter 1x desktop broadcast mic stand 1x stand base for desktop mounting 1x clip (alternative for other regular mics) 1x swamp xlr male to xlr female cable 2m 1x xlr female to 3.5mm trs cable 2m 1x trrs adapter cable features: 48v phantom power supply included large diaphragm capsule for crisp, detailed recordings all-in-one plug and play home studio recording pacakge trrs adapter to plug into smartphone or newer laptop 3.5mm jacks specifications: microphone polar pattern: uni-directional frequency response: 20hz-20khz sensitivity: 45db±1db output impedance: 1500ω±30%(at 1khz) load impedance: ≥1000 ω equivalent noise level: 16dba electrical current: 3ma microphone output interface: 3.5mm (0.14 inch) usage voltage: 48v phantom power supply wire: 3.5 inserted audio interface, 3 meters long microphone body weight: 0.51lb size: approx. 16 x 5 x 5cm (6.3 x 1.97 x 1.97inch) microphone material: steel net + zinc alloy hand holding part broadcast stand material: steel arm stand weight: 850g(1.87lb) each arm: 36cm(14.1inch) arm stand support: up to 2kg(4.41lb) double-braced arms: add strength features: stable, tough steel construction: 9x9mm(0.35x0.35inch) cross-section mount base: installed onto the desk up to 55mm(2.17inch) thickness mount on: announcers’ desk with the metal mounting base xlr male to female microphone cable: pre-installed hidden inside the boom arm tubing pop filter external diameter: 155mm(6.10inch) function: reduce p-pops in recording double-layer net diameter: 130mm(5.12inch) tube length: 375mm(14.76inch) tube diameter: 8mm(0.31inch) mounting clamp: up to 35mm(1.38inch)(clamp adjustable) flexible holder: 360 degree swivel mount