Skip to content
Locating nearby store...
Please enter at least 3 character
Suggested Suburbs
Suggested Stores
Previous Stores
Change Store
  • Most cost effective wall wrap available on the Australian market
  • Class 2 vapour barrier and water barrier
  • 97% reflective: contributes to system thermal performance and energy efficiency
  • High strength, light weight
  • Suitable for use in bushfire-prone areas

Ametalin SilverWrap™ is an extremely tough, medium duty wall wrap designed for use in brick veneer walls. Its exceptional water barrier properties provide a physical layer to protect against water and air infiltration. It is 97 percent reflective and an excellent barrier to radiant heat, enhancing the energy performance and thermal comfort of a building.

Ametalin SilverWrap™ is suitable for use as a wall wrap in all regions of Australia in residential, commercial and office buildings, including cyclone and bushfire-prone zones.

Custom printing available. Advertise your business & promote your brand on Ametalin SilverWrap™. Contact us for more information.

Ametalin SilverWrap™ is not designed to withstand prolonged direct exposure to the elements. Accordingly, upon application of this product the outer roof should be installed without delay. Aluminium foils should not come into contact with wet concrete or mortar, as the aluminium is susceptible to alkali corrosion.

Ametalin SilverWrap™ should be installed in accordance to AS/NZS 4200.2:1994 Pliable Building Membranes and Underlay’s, Part 2: Installation Requirements. Ametalin SilverWrap™ is installed with the blue side facing out.

We will gladly assist with returns and exchanges of this product in accordance with our returns and exchanges policy

Returns policy