Yates 4L Weed 'n' Feed Hose On Lawn Weed Killer

Yates Weed 'n' Feed has dual-action technology to both control weeds and give the lawn a feed. It selectively kills broadleaf weeds such as bindii, clover, dandelion and thistles; with added fertiliser that contains the nutrients, nitrogen and iron to feed the lawn and promote lush green growth. How to Use Yates Weed'n'Feed 1. Measure - measure your lawn area to work out how much to apply. 1L treats 65 m2. 4 L treats 260 m2. 2. Shake & connect - shake the bottle well then attach the hose-on applicator to your hose. 3. Set up - check the applicator on/off switch is in the OFF position. 4. Turn water on - turn on the tap using moderate to high water pressure. 5. Switch on - turn the applicator to the ON position. 6. Start spraying - walk slowly, using a sweeping motion to apply the spray evenly over the measured area. Overlap treated areas slightly to achieve full coverage. 7. Finish - turn the applicator to the OFF position, close the flap, turn off the tap and disconnect the hose. 8. Watering - avoid watering for 12 hours after application.