- ✨【3 Hours Free Electricity. Use It Later】— Schedule PowerFlex to charge during an eligible 3-hour free period under the Solar Sharer Offer (SSO) or another suitable plan. Store daytime electricity while you're out, then use it later for a compatible directly connected appliance.
- ✨【Made for Apartments & Rentals】— Designed for indoor, floor-standing use. Charge from a standard 230V wall outlet with no rooftop solar or switchboard connection needed for the standard selected-load setup. Take it with you if you change homes.
- ✨【Set It Once. Stay in Control】— Use the app to set multiple charging, discharging and standby periods, check battery status and adjust settings remotely. PowerFlex follows your schedule while you're at work or away.
- ✨【Mains or Battery. You Decide】— Keep a compatible directly connected appliance running on mains while charging, supply stored battery power later, or hold energy in reserve for outages. More control over when your selected load uses battery power.
- ✨【Start at 2kWh. Expand to 12kWh】— Begin with 2016Wh and up to 1000W battery output. Add compatible 2kWh Expansion Batteries as your needs grow, up to approximately 12kWh total capacity and up to 3000W battery output with the required modules.
________________________________________________________________________________________________
【⚡ 3 HOURS FREE ELECTRICITY | MADE FOR APARTMENTS】
✨ Indoor Power Station Designed for Apartment Living ✨
________________________________________________________________________________________________
⚡ 3 Hours Free Electricity. But You're at Work?
Free daytime electricity sounds great — until the free period happens while you're at work or away.
PowerFlex 3000 helps bridge that gap. Schedule charging during eligible free electricity hours, then use the stored electricity later for a compatible connected appliance.
Move the Power, Not Your Life.
✅ Made for Apartments & Rentals
Plug In. Set It. Let It Work Every Day.
・Simple Plug-In Setup — Charge from a standard 230V AC wall outlet. No rooftop solar or switchboard connection required for the standard selected-load setup.
・Power the Appliance You Choose — Connect one compatible appliance to the separate AC output, such as a refrigerator or Wi-Fi router.
・Fits Your Living Situation — No permanent electrical installation required for the standard setup. Take PowerFlex with you when you move.
❤️ You Decide. Mains or Battery Power.
Charge During Free Hours. Use Stored Power Later.
・Free & Off-Peak Hours — Mains power keeps your connected appliance running while PowerFlex charges.
・Peak Hours — PowerFlex supplies stored battery power to your connected appliance during scheduled discharge periods.
・Power Outages — Available battery power can support a compatible connected appliance when mains power is unavailable.
Your appliance stays connected. PowerFlex follows your schedule.
⚙️ Set It Once. Stay In Control.
Go About Your Day. PowerFlex Runs on Schedule.
Set multiple charging, discharging and standby periods from the app. Monitor battery status and adjust settings remotely, even while you're at work or away.
Make use of available free daytime electricity without changing your daily routine.
✔️ Keep What Matters Powered.
Blackout? Still On.
Keep battery reserve ready for a compatible essential appliance, such as a refrigerator or Wi-Fi router.
PowerFlex gives you another way to prepare for unexpected outages, with available power for the connected appliance when you need it.
✨ Power That Grows With You.
Start at 2kWh. Expand Up to 12kWh.
Start with PowerFlex 3000, then add compatible 2kWh Expansion Batteries as your needs grow.
More capacity means more stored electricity for later use, while supported expanded configurations can also deliver higher battery output.
Need more capacity? Search our store for “PowerFlex 3000 Expansion Battery”.
⭐ Built To Last. Backed For Years.
Up to 8,000 Charge Cycles | 10-Year Australian Warranty
LiFePO4 battery chemistry with intelligent BMS protection, designed for long-term everyday use.
⚠️ Good To Know
・Designed for a compatible directly connected load.
・Free or lower-cost electricity periods depend on region, retailer and electricity plan.
・Expansion Batteries are sold separately and cannot operate independently.
・Actual savings and how long the connected load can run depend on your electricity plan, battery state of charge, connected load and usage.
・Keep the connected load within the applicable limits and always follow the user manual.
________________________________________________________________________________________________
### Specifications
・Battery Capacity: 2016Wh (Approx. 2kWh)
・Battery Chemistry: LiFePO4
・AC Input: 230V AC, 50Hz | Max. 2300W / 10A
・AC Output: 1 × 230V AC outlet, 50Hz
・Bypass Output: 230V AC, 50Hz | Max. 2300W / 10A
・Connectivity: Bluetooth 5.0, 2.4GHz & 5GHz Wi-Fi
・Dimensions: 425 × 195 × 260mm
・Weight: Approx. 21.2kg
・Charging Temperature: -20°C to 55°C
・Discharging Temperature: -20°C to 55°C
・Cycle Life: Up to 8,000 cycles
・Warranty: 10 Years Australian Warranty
### Expandable Capacity & Load Guide
・2kWh - PowerFlex 3000 only | Recommended load: up to 1000W
・4kWh - PowerFlex 3000 + 1 Expansion Battery | Recommended load: up to 2000W
・6-12kWh - PowerFlex 3000 + 2 to 5 Expansion Batteries | Recommended load: up to 3000W
Each Expansion Battery adds approximately 2kWh of capacity. One PowerFlex 3000 supports up to 5 compatible Expansion Batteries.
### What's In The Box
・1 × PowerFlex 3000
・1 × AC Power Cable
・1 × User Manual
・2 × Wall Mount Fittings
・4 × Adjustable Levelling Feet
・Mounting Screws & Hardware