- Charges 3 separate battery banks from one alternator without electrically connecting the batteries, so draining an auxiliary bank will not flatten the starter battery.
- Schottky diode design keeps voltage drop low at approximately 0.3 v at low current and 0.45 v at rated output, reducing energy loss and heat compared with conventional silicon diodes.
- Integrated voltage compensation diode lets you adjust alternator output to offset the remaining diode drop and help batteries reach a full state of charge.
- Current-limited alternator energize input supports modern alternators that need a dc voltage on the b+ terminal to begin charging.
- Anodised aluminium heat sink and heavy-duty m8 stud terminals suit 12v and 24v dc systems in marine, automotive and off-grid installations.
The Victron 180A Battery Isolator Argodiode 180-3AC lets you charge 3 separate battery banks from a single alternator without connecting the batteries together, so running an auxiliary or house battery flat will not drain the starter battery. It uses Schottky diodes with a low forward voltage drop of approximately 0.3 V at low current and 0.45 V at rated output, plus an integrated voltage compensation diode to help offset the remaining drop. A current-limited alternator energize input supports modern alternators that require voltage on the B+ terminal to start charging. The unit suits 12V and 24V DC systems and is built around an anodised aluminium heat sink with heavy-duty M8 stud terminals for high-current connections.