- 70a rated charge current with 250v maximum pv open-circuit voltage, supporting up to 1000w at 12v, 2000w at 24v and 4000w at 48v solar arrays.
- Ultrafast mppt tracking harvests up to 30% more energy than pwm controllers, with a partial shading algorithm that locks onto the optimal global power peak.
- Built-in bluetooth smart and ve.direct connectivity allow configuration, monitoring and firmware updates via the free victronconnect app or a gx monitoring device.
- 99% peak conversion efficiency with fanless passive cooling via an aluminium heatsink, rated for full output up to 40°c ambient temperature.
- Programmable charge algorithm with eight pre-set battery profiles via rotary switch, plus ip43 electronics protection and large 35mm² terminals.
The Victron SmartSolar MPPT 250/70-Tr is a 70A solar charge controller for 12V, 24V and 48V battery systems with automatic voltage detection, featuring ultrafast Maximum Power Point Tracking that harvests up to 30% more energy than PWM controllers and a partial shading algorithm that locks onto the optimal global power peak. It accepts a 250V maximum PV open-circuit voltage for long series panel strings, supports arrays up to 1000W at 12V, 2000W at 24V and 4000W at 48V, and delivers 99% peak efficiency with fanless passive cooling for full rated output up to 40°C ambient. Built-in Bluetooth Smart and a VE.Direct port enable configuration, monitoring and firmware updates through the VictronConnect app or connection to GX monitoring devices, while the programmable charge algorithm offers eight pre-set battery profiles selectable via rotary switch for flooded lead-acid, AGM, gel and lithium batteries. The unit is rated IP43 for the electronics and IP22 for the connection area, uses large 35mm² terminals, and includes a programmable relay plus electronic protections against PV reverse polarity, short circuit and over-temperature.