Upgrade Billet Turbo Charger With 75mm Intercooler And Genuine Oil Feed Pipe For Nissan Navara D40 Yd25 2.5l 2010 Onwards

This Is A Billet Turbo Charger With Upgrade Aluminium Intercooler Kit. With A Billet Turbo Providing Better durability, A Thicker Intercooler Providing Better Cooling And Less Pressure Drop, This Upgrade Turbo & Intercooler Kit Is Designed To Bolt Straight On To Give Your Vehicle The Best Performance With No Modification And Tuning Required. What’s Included: 1 x Upgrade Billet Turbo Charger 1 x Upgrade Aluminium Intercooler 1 x Turbo Charger Gasket Kit 1 x Turbo Charger Stud Kit 1 x Turbo Charger Pre Lubricant 1 x Genuine Oil Feed & Return Pipe Brand: Turbo Pros Condition: Brand New Intercooler Core Size: 450 x 208 x 75mm Vehicle Application Nissan Navara D40 / Pathfinder R51 YD25 2.5L OEM Part No 144115X01B / 144115X01A / 14411-5X01B / 14411-5X01A / 14411-5X00A / 144115X00A Turbocharger Part No 53039880337 / 53039700337 / 53039700182 / 53039880182 / 53039700210 / 53039880210 Note: This turbo has an electronic actuator and 4-BOLT exhaust manifold flange, please confirm before ordering. Turbo Pros Upgrade Billet Turbochargers are built, high-speed VSR balanced and air flow calibrated by using the latest test balancer and flow bench to meet and even exceed the OEM specs. They come with billet compressor wheels which are lighter and stronger to improve performance and durability. Turbo Pros upgrade intercoolers have a thicker core and increased core surface area than the OEM intercoolers, which allow for more effective cooling of the charge air entering the engine. This will improve the bottom end torque and top end horsepower, make the power come in a lot sooner and stronger. Oil feed pipe supplies engine oil from the engine block directly to the turbo's bearing system, securing lubrication and cooling for the turbo shaft. Oil return pipe evacuates engine oil from inside the turbo and maintain flow through it to the oil pan. When performing a major repair on a vehicle's turbocharger, the oil drain pipe and the oil feed pipe must be kept in perfect condition to ensure good lubrication of the turbocharger, it is necessary to maintain a constant and adequate flow of lubricant. We recommend fitting a new oil feed & return pipe when replacing or refitting a turbo. Please confirm that your old turbo part / OEM number matches up with one of the part numbers above.