* Each tile is 40cm x 40cm (6 tiles per box, approx. 1 sqm). Each tile has 2 sides with external connectors and 2 sides with internal grooves that slide and interlock together.
* On the back of each tile there is an arrow. Ensure when laying your tiles that the arrow faces the same way as the tile next to it. Ensuring your grass fibres are all going in the same direction. To begin your installation lay your first tile down in a corner.
* Lay the 2nd tile down level to the 1st. Ensure one of the tiles has an external connector and one has an internal groove facing each other. Lift the side with the internal grooves up and slide the tile down into the external connectors. Continue this process until all your tiles are used and your area is completed.
* If you need to trim a tile to fit into an area you can use some secateurs or a sharp utility knife. Make your measurements on the back of the tile, mark the tile with some chalk and run the blade through several times until it cuts and fits into your area.
* The grass tile can be re-used as many times as you like and in many different places. To undo simply push the tile down with one hand and push up with the other and the tile slides apart.
* Use a power broom or stiff bristled brush to comb the grass and help to stand up. This method can also be used to maintain the grass as can a broom or a blower. For any pet, dirt or other mess simply hose the grass and the water will drain through.