The Stanley 176 Piece Blowmould Tool Kit features an assortment of tools ideal for use around the home and garage. The kit includes a large range of sockets in 1/4, 3/8 and 1/2” drive, quick release ratchets, spanners, screwdrivers, pliers, adjustable wrench and a huge assortment of screwdriver bits. Stanley sockets feature the unique MaxDrive™ design, offering protection for both the socket wall and the fastener by taking the driving force away from the extreme corners of the nut where there is the greatest risk of damage. The combination spanners feature a unique Maxi-Drive™ design on the open end jaw, designed to lock the spanner onto the nut, reducing slipping when applying force. Stanley Combination Spanners also feature a 15 degree offset on the open end for ease of use in tight spots. The bi-hex ring end is also cranked at 15 degrees from the horizontal, helping to prevent injury when in use.
Warranty InfoLimited Lifetime GuaranteeStanley quality products are Guaranteed against any defect in material or workmanship. Damage caused by abuse, improper use or excessive wear is not covered by this warranty.This warranty is provided in addition to other rights and remedies you have under law: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.Claims should be returned, with proof of purchase, to the place of purchase or returned prepaid to the address below. Repaired or replacement goods will be returned at our cost.Stanley Black Decker (Australia) Pty Limited82 Taryn Drive Epping, VIC 3076, AUT 1800 338 002 F 1800 080 898www.stanleyworks.com.au
D.I.Y. Basics: Get to know your random orbital sander
A quick guide to your random orbital sander and why it’s the ideal tool for little sanding jobs around the house.
D.I.Y. Basics: Get to know your reciprocating saw
We’ll show you what makes a reciprocating saw the ideal tool for renovating or demolishing.
D.I.Y. Basics: Get to know your belt sander
A quick guide to your belt sander and what makes it the ideal tool for sanding large, flat areas.
D.I.Y. Basics: Get to know your electric planer
Find out what makes an electric planer the ideal tool for shaving down and smoothing out timber.
D.I.Y. Basics: Get to know your angle grinder
Find out what makes an angle grinder the ideal tool for cutting and grinding metal and stone.
D.I.Y. Basics: Get to know your circular saw
A quick guide to your circular saw and what makes it the ideal tool for cutting timber easily and efficiently.
D.I.Y. Basics: Get to know your cordless drill
We’ll show you what makes a cordless drill the ideal tool for drilling holes and driving screws.
D.I.Y. Basics: Get to know your hammer drill
Find out what makes a hammer drill the ideal tool for drilling into concrete, brick, stone or mortar.