Ryobi Wooden/Timber Door Lock Installation Kit

The RYOBI Wooden/Timber Door Lock Installation Kit provides accessories that simplify the process of fitting a lock and deadbolt to a timber door. It enables accurate drilling of precise holes to ensure the door’s latch meets the strike plate (metal plate on the door frame). All the essentials are included to help you install new locking hardware confidently, the first time around! This Kit contains a Bracket with an Auto-Strike Locator, 54mm Hole Saw, Arbor with Pilot Bit, 25mm Spade Bit and Spade Bit Guide, 2.4mm Black Oxide Drill Bit, PH2/SL8-10 Double Ended Driving Bit and 2 x Mounting Screws. Eliminates guesswork The Bracket’s Auto-Strike Locator enables precise alignment between the door and strike plate, eliminating the need to take measurements. Once secured to the door with the included screws, it guides drilling so that the holes line up correctly. The Bracket works with standard 60mm and 70mm backsets*, in addition to common Australian door thicknesses of 35mm and 44mm. Precise installation To create the cross bore (large hole for the lock) and latch bore (smaller hole for the latch), pair the Hole Saw, Spade Bit, and Spade Bit Guide with a drill driver (not included). The Locator’s extra-deep cross bore guide improves stability during drilling, helping the Hole Saw, Arbor and Pilot Bit produce straighter, cleaner holes. The Spade Bit Guide keeps the Spade Bit centred to make a straight, precise latch hole. *Distance from the edge of a door to the centre of the bore hole.