Icon - Website - Mobile - Add to project list.svgIcon - Website - Mobile - Cart.svg

Sign in to your account

Project list

Sign in to your account

Roof Extenda Bracket And Weather Seal Package

5 (2)

I/N: 1130000

5 (2)

I/N: 1130000

Select your preferred purchase method


  • Bolts attach brackets to rafter and top wall plate for extra strength and structural integrity
  • Airflow between roof-lines provide improved ventilation in the summer heat
  • Adjustability allows run off angle to be optimised and adds height for larger vehicles - 4WD’s, boats, caravans etc
  • Proudly Australian designed and made in Australia by a proud Australian owned company
  • New roof line is raised above the existing spouting therefore providing easy access for cleaning and maintenance
The Roof Extenda Bracket is designed to provide “A Better Way” of attaching main beams for carports, pergolas, pool enclosures or any other roofing project that is to be added to the roof line. Roof Extenda Bracket attaches to the rafter and the wall top plate, therefore, providing strength, safety and peace-of-mind. Unique steel brackets offer structurally superior fixing of extended roof-lines to buildings.












Easy To Carry

Total Weight 1.50kg


Zinc Plated
Model Name
Roof Extenda MkII Bracket and Weather Seal Package
Model Number
Mild Steel
Pack Quantity
Zinc Plated Steel
Item Package Type
Plastic Bag

Guides & Documents

Warranty & Returns

The zinc plating is guaranteed under normal climatic conditions.

We will gladly assist with returns and exchanges of this product in accordance with our returns and exchanges policy.


Bracket must bear on and be fixed to existing top plate with 2 x M10 Hex screws.
1. Remove roofing tiles or lift roof sheet to achieve an opening to fit the Roof Extenda Bracket.
2. Bolt angle bracket section with the threaded rod to the selected rafter with min. 2 x M12 Hex bolts.
3. Provision has been made to screw the angle section to the existing wall plate using 2 x M10 Hex Screws to eliminate any uplift.
4. Replace roof tiles or roof sheet cutting a hole to allow the threaded rod to penetrate the roof.
5. The weather seal is fitted to the top bracket, top bracket is then wound down to the desired height and the lock nut tightened. Mark the position of the weather seal on the roofing. Slide the weather seal up to apply clear neutral cure silicone inside the area
marked, press the weather seal into position and finish with a bead of silicone to the edges of the weather seal to complete the fitting.

NOTE: Local council or shire approval may be required prior to construction. Roof Extenda accepts no responsibility for the type of construction undertaken.

Ratings & Reviews