ONEKWh 500W 1004Wh Power Station + VoltX 100W Fixed Solar Panel + 30A MPPT Solar Charge Controller

--- Product 1: ONEKWh MINI-1000 500W 1004Wh Portable Power Station --- ### Specifications ・Brand: ONEKWh ・Model: MINI-1000 ・Capacity: 1004Wh ・Battery Type: LiFePO4 (Lithium Iron Phosphate) ・Life Cycles: 6,000+ Cycles ・Shelf-Life: Recharge to 100% Every 3 Months ・Management System: MPPT Controller, BMS ・Charging Method: Solar, Car, AC charging ・AC Output: 2x AC 230V/50Hz, 500W Total Rated, 600W Peak ・USB-A Port: 2x 22.5W Max ・USB-C Port: 1x 22.5W Max ・AC Input: 500W Max ・Solar Input: 300W Max ・Car Input: 180W Max (Vehicle-Dependent; Typically Up to 120W) ・Maximum Input: 500W ・AC Charge: Approx. 2 hours ・Solar Charge: Approx. 4 hours ・Car Charge: Approx. 5 hours (180W); Approx. 8 hours (120W) ・LED Indicators: 1 white power status + 4 purple battery level indicator lights ・Multiple Protection: Over-Current, Short-Circuit, Over-Voltage, Over-Charge, Over-Discharge, Over-Temperature, Lack of Voltage ・Charge Temperature: 0°C-40°C ・Discharge Temperature: 10°C-40°C ・Storage Temperature: -10-45°C ・Warranty: 12 Months ### Dimensions & Weight ・Product Size: L330xW190xH212mm ・Package Size: L382xW250xH300mm ・Net Weight: 9kg ・Gross Weight: 10.5kg ### What's In The Box ・1x ONEKWh MINI-1000 Portable Power Station ・1x AC Charging Cable ・1x Anderson plug (50A) to XT60 ・1x Cigarette lighter plug to XT 60 ・1x Quick Start Guide --- Product 2: VoltX 100W Fixed Solar Panel --- ### Specifications ・Brand: VoltX ・Max Power: 100W ・Max Power Voltage (Vmp): 18.74V ・Max Power Current (Imp): 5.34A ・Open-Circuit Voltage (Voc): 22.86V ・Short-Circuit Current (Isc): 5.61A ・Max System Voltage: 1000V ・Max Series Fuse Rating: 15A ・Module Efficiency STC (%): 18.9% ・Cell Efficiency: 22% ・Power Tolerance: 0-5W ・Standard Test Conditions: E=1000W/m² AM=1.5, TC=25℃ ・Working Temperature: -40°C-85°C ・Temperature Coefficients of Pmax: -0.34%℃ ・Temperature Coefficients of Voc: -0.265%℃ ・Temperature Coefficients of lsc: +0.05%℃ ・Nominal Operating Cell Temperature (NOCT): 45±2°C ・Type: Fixed ・Solar Cell: Monocrystalline Grade A ・Cell Tech: PERC ・Panel Leads (Pair-AWG): 2.5mm² ・Solar Connectors: Junction Box + 0.9m Cable With MC4 Connector ・Tie Down Points: Yes, 4 Points ・Frame: Anodized Aluminium Alloy ・IP Rating: IP65 ・Certifications: CE, ISO ・Warranty: 5 Years ### Dimensions & Weight ・Product Dimensions: L980xW540xH30mm ・Package Dimensions: L1000xW560xH45mm ・Net Weight: 5.6kg ・Gross Weight: 6.5kg ### What's In The Box ・1x VoltX 100W Fixed Solar Panel Black Frame --- Product 3: SRNE VoltX 30A 12V/24V MPPT Solar Charge Controller --- ### Specifications ・Static power consumption: ≤30mA ・Battery Type: USE/FLD/GEL/LI/SLD(Default) ・System voltage: 12V/24V ・Battery's operating voltage range: 8V-32V ・Rated charging current: 30A ・Maximum PV Input Current: 27A ・Maximum solar panel power: 400W/12V; 800W/24V ・Maximum PV open-circuit voltage: 150V ・MPPT operating voltage point range: (Battery Voltage +2)~110V ・MPPT tracking efficiency: >99% ・Charging conversion efficiency: 85%-98% (10%-100% of rated power) ・Rated load current: 30A ・Load operating mode: Pure light-dependent control, light and time-dependent control, manual mode (default), debugging mode, normally opened. ・TTL communication: Baud Rate 9600kps ・RS485 communication: One isolated RS485 communication port, with power output of 5V200mA, baud rate of 9,600kps by default and adjustable. ・CAN communication: RV-C Protocol ・Historical data: Can store historical data of the past 300 days ・Protection function: PV Overvoltage Protection, PV Reverse Connection Protection, PV Short-Circuit Protection, Nighttime Reverse Charge Protection, Input Limited Power Protection, Overtemperature Protection, Load Short-Circuit Protection, Load Overload Protection, Battery Supervoltage/Over-discharge Protection, Battery Reverse Connection Protection and Battery Terminal Short-Circuit Protection. ・Grounding type: Co-negative design and negative grounding ・Cooling mode: Natural Cooling ・Parallel connection for charging: No ・Charging voltage line loss compensation: No ・Support full settings: Yes ・Constant voltage output setting: Yes ・Charging temperature compensation of lead-acid battery: Yes ・Temperature protection: Yes ・Overload/short-circuit protection: Yes ・Load pre-start: Yes ・Protection grade: IP32 ・Operating ambient temperature range: -35°C~ 65°C (no derating within 45°C if well ventilated) ### Dimensions & Weight ・Dimension: 260x216x83.2mm ・Mounting hole spacing: 200 mm ・Weight: 2.3kg ・Fixed hole position: Φ10mm ### What's In The Box ・1x 30A MPPT Solar Charge Controller Solar Controller Note: The separate solar charge controller is intended for compatible battery charging systems, not for direct connection to a power station solar input. Verify wiring, voltage, polarity and compatibility before use. Important Safety Notice: Power stations are for general consumer and backup use only, not certified for medical, life-support or other critical applications. Do not rely on them as the sole power source for equipment requiring uninterrupted operation. Tips: The items in this bundle will be shipped separately. Packages may arrive at different times. Please wait for all parcels to arrive.