Machter Autoparts 25MM Diff Drop Kit Fit For Ford Ranger PX For Mazda BT50 Everest 2011-On

Features Application Specific Lowers Front Diff By Approx. 25mm Corrects CV Geometry Designed For Lifted 2" - 4" 4WD Model Use Description When Lifting IFS Vehicles, The Constant Velocity (CV) Joints Are Put On An Increased Angle. This Increased Angle Of The CV Joint During Operation Can Accelerate The Wear On The Joint, As Well As Putting Additional Stress On The CV Boots Leading To Splitting And Eventually Premature Failure Of The CV. This Wear Is Accelerated Further If Larger (Wider) Wheels And Tyres Are Fitted. Our IFS Diff Drop Kits Are Application Specific And Supplied Complete To Get The Job Done. The Bolt On Kit Corrects The Geometry On The Front Driveshaft And CV’s, Lowering The Front Diff By Approx. 25mm, Thus Reducing The Angles The CV Joints Need To Operate On, And Avoiding The Expensive Replacements Of CV’s And Boots.  Fitment For Ford Ranger PX I  2011-2018 Don't Fit For  PX II PX III For Ford Everest 2015 - 2019 For Mazda BT50 2011 - 2019 Notes Not Including Installation Guide Or Manual Professional Installation Is Recommended Please Note This Kit Does Not Fit Vehicles With A Factory Transmission Cooler Behind The Front Diff Package 3  Diff Drop Brackets 1 x Tapered Block 1 x Tail Shaft Spacer All Necessary Bolts & Washers