KPR HD 4WD Rear Brake Pads For Toyota Sequoia UCK60 4.7 V8 Nov 2007-Apr 2009 DB1857

KPR HD 4WD Brake Pads KPR part number: KP1857-4WD Listing SKU: KP1857-4WD09 Reference: DB1857 Position: Rear Supplied quantity: 1 axle set of brake pads. Designed for demanding driving, off-road use and heavier-load applications where the listed original brake assembly is fitted. The HD 4WD series focuses on consistent braking response, wear resistance, heat resistance and reduced operating noise. Performance and service life depend on vehicle condition, loading, installation and use. Compatible vehicle configuration Toyota Sequoia UCK60 4.7 V8 | Nov 2007-Apr 2009 | Rear UCK60 / 2UZ-FE. Original second-generation disc-brake calipers; excludes later-generation hybrid vehicles. Original rear pads must match DB1857. Product features - Heavy-duty friction material for the HD 4WD series. - Formulation designed to support consistent response under demanding braking conditions. - Noise-reduction design; correct installation and bedding-in are required. - Pad profile matched to the listed reference for the specified original caliper. Fitment and installation Not universal. Check chassis, build date, axle, original pad reference, caliper and all brake-option restrictions before ordering. Different factory brake packages and aftermarket calipers are excluded unless expressly listed. Replace as an axle set and follow the vehicle and pad installation instructions. Have the brakes checked and fitted by a qualified technician. Images Packaging and series photographs are representative; pad shape, markings and hardware may differ by application. The part number, DB reference and axle specified above identify the supplied product. The additional model drawing shows the matching KPR pad profile for identification. Compare the original caliper and pad before ordering; the drawing does not specify the 4WD friction compound.