- Glass Window shows if the fuse has blown
- 2 x 1 AMP Fuses (5mm x 20mm)
- Suits most makes of Irrigation Controllers
The 20mm 1 AMP Fuse pack is great to have on hand in case you get a blown fuse through your controller. A Blow fuse is a result of an electrical overload. This could be a result from a system fault or a power surge. A common fault is a solenoid coil rusting and shorting out. To identify the problem coil, observe the controller and watch what station blows the fuse.
Before installing a new fuse, ensure that any electrical problems have been addressed & fixed otherwise the replacement fuse will blow also.
NOTE: Replace blown fuse with the same compatible size.
All Holman controllers use A 1 AMP 20mm fuse
