Gen1 High Flow Turbo Charger With Genuine Oil Feed Pipe For Nissan Navara D40 Yd25 2.5l 3-bolt

Turbo Pros GEN1 turbochargers are high flow, engineered to improve turbo efficiency and fatigue life. - Direct Bolt On - No Tuning / Modification Required - 15% More Air Flow & Less Lag - Increased Fuel Efficiency - Better Boost Response - Designed Performance Aluminium Billet Wheel This is a complete turbocharger with an actuator. High Tensile Stud Kit, Gasket Kit & Turbo Pre Lubricant Are Included. Genuine Oil Feed & Return Pipe Is Included. (Shown in the first picture) Vehicle Information Application: Nissan Navara D40 / Pathfinder R51 Engine: YD25DDTi 2.5L Fuel Type: Diesel Turbocharger Information Brand: Turbo Pros Model: GT2056V Cooling Type: Oil & Water OEM Part No 14411-EB300 / 14411EB300 Turbocharger Part No 751243-5002S / 751243-0002 / 751243-9002 / 751243-5002 Note: This turbo has a pneumatic actuator and 3-BOLT exhaust manifold flange, please confirm before ordering. Oil feed pipe supplies engine oil from the engine block directly to the turbo's bearing system, securing lubrication and cooling for the turbo shaft. Oil return pipe evacuates engine oil from inside the turbo and maintain flow through it to the oil pan. When performing a major repair on a vehicle's turbocharger, the oil drain pipe and the oil feed pipe must be kept in perfect condition to ensure good lubrication of the turbocharger, it is necessary to maintain a constant and adequate flow of lubricant. We recommend fitting a new oil feed & return pipe when replacing or refitting a turbo. Please confirm that your old turbo part / OEM number matches up with one of the part numbers above.