Gen1 High Flow Turbo Charger With Genuine Oil Feed Pipe For Mitsubishi Triton Mn 4d56 2.5l 4wd Vt16

Turbo Pros GEN1 turbochargers are high flow, engineered to improve turbo efficiency and fatigue life. - Direct Bolt On - No Tuning / Modification Required - 15% More Air Flow & Less Lag - Increased Fuel Efficiency - Better Boost Response - Designed Performance Aluminium Billet Wheel This is a complete turbocharger with an actuator. High Tensile Stud Kit, Gasket Kit & Turbo Pre Lubricant Are Included. Genuine Oil Feed Pipe Is Included. (Shown in the first picture) Vehicle Information Application: Mitsubishi Triton MN 4WD 4D25 2.5L 2009 Onwards Mitsubishi Challenger 4D25 2.5L 2009 Onwards Engine: 4D56 2.5L Common Rail (Intercooled) Fuel Type: Diesel Turbocharger Information Brand: Turbo Pros Model: RHV4 Cooling Type: Oil & Water OEM Part No 1515A170 Turbocharger Part No VT16 / VAD20022 / V41VAT-S0022B / V41VATS0022B Oil feed pipe supplies engine oil from the engine block directly to the turbo's bearing system, securing lubrication and cooling for the turbo shaft. When performing a major repair on a vehicle's turbocharger, the oil drain pipe and the oil feed pipe must be kept in perfect condition to ensure good lubrication of the turbocharger, it is necessary to maintain a constant and adequate flow of lubricant. We recommend fitting a new oil feed pipe when replacing or refitting a turbo. Please confirm that your old turbo part / OEM number matches up with one of the part numbers above.