- Will not yellow
- Semi translucent coating
- Hard wearing finish
For one-step, soft milky white colour and protection for interior timber floors, Feast Watson Timber Floor Stain & Varnish Liming White is a water-based, traditional lime stain combined with a professional clear polyurethane. Providing a satin finish while retaining the timber grain, it is hard wearing and will not yellow.
How to prepare your Timber Floor Stain & Varnish:
Final steps, here we go:
How to prepare new or bare timber/cork:
Punch exposed nails below the surface. If you have any holes and imperfections, they should be filled with timber putty.
Sand timber to an even, smooth surface. Remember to vacuum and wipe to remove dust.
NOTE: Prepare uncoated cork tiles in accordance with the supplier's recommendation.
For best results, seal uncoated or tannin rich timber with Feast Watson Proofseal and allow to dry thoroughly before applying Timber Floor Stain & Varnish.
Previously Coated Timber
How to prepare previously coated timber:
Sand back your coated surface back to bare timber. Remember to remove all sanding dust before coating!
How to apply your Timber Floor Stain & Varnish Liming White:
Let's get that white, airy feel...
Without introducing any bubbles, use a flat blade stirrer and thoroughly stir your product both before and during application.
Note: If you are coating a large space and need more than one Timber Floor Stain & Varnish colour, mix all together in a large container.
Make sure you love your colour choice! Test your colour on an off-cut to ensure you love your colour.
Using the Feast Watson Floor Finish Applicator, brush or short nap mohair roller, apply your first coat. Work along 3-4 floorboards at a time, maintaining a wet edge to prevent lap marks and lay off in the direction of the grain. And remember, avoid introducing any bubbles!
Timber Floor Stain & Varnish is a three-coat flooring system. If you have achieved your colour before 3 coats that's okay! Finish off your floor with a water based clear floor coating such as Cabot's CFP Floor Water Based as per label instructions, and you're good to go.
Note: With each coat, achieves a stronger Liming White colour. Continue applying coats by the above procedure, sanding between coats, until the your colour is achieved.
How to maintain my floor using Timber Floor Stain & Varnish Liming White:
Follow these steps to ensure your maintain your beloved colour…
1. Regularly clean using Feast Watson Floor Clean.
2. Ensure you keep an eye on your floor for signs of colour loss or surface defects.
3. When floor requires an additional coat of Timber Floor Stain & Varnish, apply as per the instructions for Previously Coated Surfaces.