Bunnings
Icon - Website - Mobile - Add to project list.svgIcon - Website - Mobile - Cart.svg

Sign in to your account

Project list

Sign in to your account

Feast Watson

Feast Watson 4L Merbau Traditional Timber Oil

4.8 (5)

I/N: 0011534

4.8 (5)

I/N: 0011534

Select your preferred purchase method

Features

  • For exterior use on timber decking and exterior woodwork
  • Oil based
  • Hard wearing
  • Semi-transparent
  • UV resistant
A traditional oil enriched with eucalyptus for a beautiful even finish to decking and exterior timber. This hard wearing oil will offer UV resistance, protecting your timber decks and woodwork year round.

PREPARATION
New Timber

How to prepare new timber:

Allow your new timber to weather for 4-6 weeks before applying.
Ensure your deck is clean and ready to go with Feast Watson Woodclean.
Sand the surface lightly to remove any raised grain for the best results for your deck. And remember, remove any leftover dust before coating!
Weathering Timber

How to prepare weathered timber:

Ensure your deck is clean and ready to go with Feast Watson Woodclean.
For best results, sand your timber slightly to remove any deteriorations. Make sure to remove all left over sand before coating!
Already Coated Timber

How to prepare previously coated timber:

If your deck already has stain or oil, don't worry. Check if your surface is ready by sprinkling water onto your deck:
if the water absorbs into the timber - you're good to go!
if the water beads, you will need to let your deck further weather, or if you don't want to wait, you can either sand or strip your deck back to bare timber.
Painted or Varnished Timber

Do you have a painted or varnished surface?
Before coating, you must bring your timber back to bare timber by stripping or sanding your deck.

APPLICATION
Before you get started, you need to ensure the following:

You have followed our preparation guide
Your timber is completely dry before coating.
You've stirred your Traditional Decking Oil thoroughly before starting (and during!). Avoid introducing any bubbles!
If you are coating a large space and need more than one Traditional Oil, mix both cans together in a large container.
Ok, let's get started:

Work 3-4 boards at a time along the grain, and apply one coat of Traditional Timber Oil using a brush, roller, spray, or Feast Watson Floor Applicator. Using a roller or spray? Make sure to back brush the coating. This way you will ensure even penetration.
Note: ensure your edges and end grain are fully coated!
Let the oil penetrate into your timber for 30-60 minutes, and then wipe off any excess product with a dry applicator or cloth before your timber becomes tacky.
Let your timber dry for another 60 minutes.
Apply a second coat. After 30-60 minutes, wipe off any excess product.
Note: Wiping off the excess product is an important step to gaining that beautiful finish!
If you want a longer-lasting finish, apply a third coat, and follow the previous steps.

You can start walking on your beautiful new deck after 18 hours of drying time.

Details

Dimensions

 

Width

Height

Length

Product

176mm192mm176mm

Package

176mm193mm176mm

Weight

Easy To Carry

Total Weight 3.8kg

Specifications

Colour
Other
Model Name
Traditional Timber Oil
Model Number
840W0274-4L
Volume
4L
Application Method
Brush or decking applicator
Outdoor (Yes/No)
Yes
Splatter Resistant (Yes/No)
No
Indoor (Yes/No)
No
Low Temperature (Yes/No)
No
Time Before Recoating (mins)
60
Minimum Temperature for Use
10
Primer Required (Yes/No)
No
Recommended Surfaces
Exterior Timber
UV Resistant (Yes/No)
Yes
Cleanup
Mineral Turpentine
Waterproof (Yes/No)
Yes
Coverage Area (m2)/L
10
Container Size (L)
4

Guides & Documents

Returns

We will gladly assist with returns and exchanges of this product in accordance with our returns and exchanges policy.

Ratings & Reviews