- Deeply penetrates to enrich the natural look of timber
- UV, mould and water resistant
- Easy and convenient brush-on oil or spray application
- Available in four semi-transparent colours and a clear finish
Feast Watson's Outdoor Furniture Oil is a protective, penetrating oil, that has been formulated to preserve and maintain the natural beauty of outdoor timber furniture. It penetrates deeply to enrich, preserve and maintain the natural look of timber and has UV, mould and water-resistant properties. Available in a brush-on oil or convenient spray with four semi-transparent timber colours and a clear finish, it is suitable for use on all outdoor timber.
PREPARATION
Using the Feast Watson Woodclean, ensure your furniture is clean from any dirt, oil, wax or grease. Allow to dry before applying.
APPLICATION
Make sure your Outdoor Furniture Oil is thoroughly stirred both before and during application to ensure a uniform colour.
Note: If you require more than one can, mix them together in one large container before starting work.
Using a quality brush or the Outdoor Furniture Spray, apply your first coat. Work along 3-4 plants at a time, in the direction of the grain. And remember, ensure your edges and end grain are fully coated!
- If you are using the spray, remember to back brush to ensure even penetration.
Go make yourself a coffee and let the oil penetrate. Once you have had your coffee, remove any excess oil with a brush or clean cloth.
Leave to try for 12 hours before the second coat.
TIP: When applying oil to outdoor furniture, it is always best to work on the inside of the leg first and lap your way around, then work up onto the seat. Finish off with the back of the chair or bench.
MAINTENANCE
How to maintain my furniture after using Feast Watson Outdoor Furniture Oil?
As you would any outdoor furniture, keep an eye out for any signs of colour loss, dryness and weathering.
If required, use Woodclean to clean the surface, and recoat with one coat of Feast Watson Outdoor Furniture Oil.