Elinz Car Dash Cam Hardwire Charger Fuse Kit Micro USB 11.8V Low Voltage Protection

MORE DESCRIPTION Elinz Car Dash Cam Hardwire Charger Fuse Kit Micro USB 11.8V Low Voltage Protection PRODUCT HIGHLIGHTS • Permanent Power for Dash Cam ◦ No need for cable from car lighter socket. The hard wiring kit frees up the 12V socket in your car so you can charge your phone, tablet or power a laptop while your dash cam runs seamlessly from its own hard-wired power source • 24/7 Parking Surveillance ◦ This can provide uninterrupted power supply for dash camera for 24 hours, to protect against theft when your car is in the parking lot. • ACC Mode ◦ With ACC wire your dash can turn on and off with the ignition • Easy to Install ◦ No need for splicing, crimping or soldering, easily connect the wires to your vehicles fuse box and you're good to go. • Standard Micro USB Plug ◦ It works with most dash camera with micro usb port, kindly check the specifications of your dash camera to check the compatability • Compatible with 12V-24V Vehicles ◦ This hardwire kit connects your dash camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12V – 24V. • Overcurrent Protection ◦ Cuts off power when electricity is over 2.9A • Low Voltage Protection ◦ It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.8V or 23.7V, which leaves you with enough power to start your car. PRODUCT DESCRIPTION • Input: DC12V/24V • Output: 5V/2A • Connector: Micro USB • Working Temperature: -40°F-160° F • Cable Length: 3m • Low Voltage Protection: automatically cut off the power when voltage is lower than 11.8 V or 23.7 V