Bunnings
Icon - Website - Mobile - Add to project list.svgIcon - Website - Mobile - Cart.svg

Sign in to your account

Project list

Sign in to your account

Dy-Mark

Dy-Mark 300g White High Gloss MetalPro Quick Dry

4 (2)

I/N: 0174725

4 (2)

I/N: 0174725

Select your preferred purchase method

Features

  • Touch dry in 10-15 minutes (at 25°c)
  • Anti-corrosive coating
  • Ideal for interior and exterior projects
  • Durable enamel
Dy-Mark MetalPro Quick Dry Enamel is a quick-drying top coat which protects surfaces against rust whilst providing a durable finish. Ideal for both interior and exterior projects. Suitable for use on all metal surfaces such as fences, gates, doors, letterboxes, fabricated steel, brackets, trailers, factory equipment and machinery. Available in gloss, satin, flat and metallic finishes.

Details

Dimensions

 

Width

Height

Length

Product

65mm200mm65mm

Package

107mm220mm290mm

Specifications

Colour
High Gloss White
Model Name
Dy-Mark MetalPro Quick Dry High Gloss White - 300g
Model Number
23603003
Material
Paint
Volume
.3L
Application Method
Aerosol spray
Outdoor (Yes/No)
Yes
Indoor (Yes/No)
Yes
Time Before Recoating (mins)
60
Minimum Temperature for Use
10
Primer Required (Yes/No)
Yes
Recommended Surfaces
Pre-painted metal surfaces,steel,wrought iron,galvanised iron and non-ferrous metal such as; aluminium,alloys,ZINCALUME® and stainless steel.
Coverage Area (m2/L)
2
Cleanup
Clean up wet paint with Mineral Turps or General Purpose Thinner.
Container Size (L)
3
Tintable (Yes/No)
Yes
Sheen
Gloss

Guides & Documents

Returns

We will gladly assist with returns and exchanges of this product in accordance with our returns and exchanges policy.

Installation

Preparation:
Surface should be clean, dry and free from contaminants such as rust, oil, grease, dirt and salt. Wipe surface with Mineral Turps or General
Purpose Thinner. Thoroughly sand new metal and lightly sand previously painted surfaces to ensure maximum adhesion. Remove loose rust and
flaking paint with a wire brush, scraper or mechanical sander. For best results, always remove rust back to bare metal. For superior protection
and adhesion on mild steel surfaces it is recommended to prime with the appropriate Dy-Mark Primer. For non-ferrous metals such as
aluminium and alloys, ZINCALUME®, stainless steel, use Dy-Mark Etch Primer.
Application:
Before spraying, cover surrounding areas to protect from overspray. Shake can for at least 45 seconds AFTER the mixing ball
begins to rattle. Shake the can occasionally during use. Hold the can upright approximately 20-25cm from the surface.
Spray with a smooth sweeping motion. To prevent paint from sagging, apply several light mist coats rather than one heavy
coat.
Adjust nozzle to achieve desired spray pattern. Use horizontal setting to spray up and down and the vertical stetting to spray
left to right.

Ratings & Reviews