Dry 1 26X2.00 Rigid Bead Mountain Bike Tyre - 50-559

How to measure tyre wear To measure the wear on your tyres and to know when they need replacing, you need to inspect the tread. The tread comes into direct contact with the terrain you are cycling on and therefore determines your tyre's performance. A tyre needs to be changed when the centre knobs are worn down to the same height as the side knobs. How to remove a tyre To remove your tyre, first deflate the inner tube until no more air comes out. Once deflated, use a tyre lever to remove the tyre from the rim. How to fit a tyre To put the tyre back on, place one side of the tyre into the bottom of the rim. Next, inflate your inner tube to approximately 10% before putting it into the tyre (inflating it beforehand reduces the risk of pinching the inner tube). Then, place the other side of the tyre into the rim, starting on the side opposite the valve. Before inflating the inner tube all the way, check to make sure it isn't pinched between the tyre and the rim. How to inflate your tyre correctly Inflate your tyre carefully. The recommended pressure is indicated on the side of your tyre as well as on its product sheet (available online). Before each outing, make sure that your tyres are at the correct pressure for your ride. Tip from the pros When inflating your tyre, be sure to inflate it to the correct pressure for the terrain you will be riding on and especially the weather conditions. When riding in rainy weather, lower the tyre pressure to increase the tyre's traction. When riding in dry weather, you can increase the pressure for better performance. Key benefits: 1. Traction: 5 2. Traction: The knobbly tread optimises power transfer on dry and rolling terrain. 3. Puncture resistance: 4 4. Puncture resistance: Its design provides good resistance to punctures. 5. Efficiency: 3 6. Efficiency: The pedalli...