Measure and mark the area for the hopscotch court. We made ours about 3.5m x 1.2m. But make yours to fit the area you have. Use a line marker to map out the area to be cleared.
Use a rake to remove the top soil, leaves twigs and any loose material, until you get to the compacted soil. This ensures you have a solid base for the concrete mix that will hold the pavers in place.
Spread the bags of brickies sand until you have a base that's 30–50mm thick. Level the sand off with a screed, then use a screed and a level to make sure the sand is flat.
Use a compactor to make the sand a stable base for the hopscotch court to be built on. You can hire a compactor from your local Bunnings.
Lay out the pavers to make your hopscotch court. You can make the court any design you like. If you want, you can mark where the pavers go with spray paint.
Mix the concrete according to the instructions the bag. You can mix the cement in either a wheelbarrow or concrete mixer. Remember to always wear a dust mask when mixing cement.
Place cement on the sand base where the paver will go. Use enough to make sure the paver sticks to the ground. Place the paver on top of the cement and tap it into place with a rubber mallet. Use the spirit to make sure it's level. Repeat the process for all the pavers. Make sure that all of the pavers are level with each other. Allow the cement to cure and settle.
Once the concrete has cured, fill in the area around the pavers with pine bark mulch and stones. Then put some plants around the pavers to add a splash of colour.
Get the kids to use coloured chalk to number each of the pavers. Then it's time for them to play on their new hopscotch court!
Asbestos, lead-based paints and copper chromium arsenic (CCA) treated timber are health hazards you need to look out for when renovating older homes. These substances can easily be disturbed when renovating and exposure to them can cause a range of life-threatening diseases and conditions including cancer. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer or visit our Health & Safety page.
When following our advice in our D.I.Y. videos, make sure you use all equipment, including PPE, safely by following the manufacturer’s instructions. Check that the equipment is suitable for the task and that PPE fits properly. If you are unsure, hire an expert to do the job or talk to a Bunnings Team Member.