Project Overview

If you have grout that is chipping or discoloured, you might need to remove it. We show you everything you need to do the job. You will also see what tools are available to make it a bit easier.
Continue to Step-by-step instructions.
Time Required

Quick Fix

Quick Fix

A quick fix project usually takes around 1-2 hours

 

Step by Step Instructions

1 Use the multi-tool to remove grout
2 Use the grout saw to remove grout
  • Step 1. Use the multi-tool to remove grout

    Sweep away any loose debris or dirt using the dustpan and brush. Then use the multi-tool to cut into the grout. You might be tempted to push down on the tool as you cut. But it works much better if you let the tool do the work for you. Stop every so often to sweep the dust away so you can see what you are doing.
  • Step 2. Use the grout saw to remove grout

    Some areas of grout will be difficult to reach with the multi-tool. This is where the grout saw comes in handy. It lets you work up close to the edges without damaging the tiles. Like with the multi-tool, stop every so often to sweep the dust away so you can see what you are doing.

Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions which came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings team member.

Top of the content