Project list
Sign in to your account
With project lists you can...
- Create multiple lists
- Plan out the products you need for your project
- Add your completed Project List directly to your cart
Please sign in or create an account to use Project Lists
Project list
Sign in to your account
With project lists you can...
Please sign in or create an account to use Project Lists
ByÂ
/If their personal projects are anything to go by, our Bunnings Team Members can’t get enough of D.I.Y. – both off and on the clock! Team member Leanne gave D.I.Y. a red hot go and created this rustic house-number planter after seeing similar ones for sale online. Her savvy build uses salvaged hardwood and artificial plants, making it both low cost and low maintenance. No watering, ever!
“I found some old wood from a playhouse and a flower bed and decided to make a house number planter that I kept seeing online. By using faux plants from Bunnings, I didn’t have to create a soil bed so it was super easy to make,” she says.
Leanne used three equal-sized timber lengths to build the backing panel. She edge-glued the boards together with exterior high-strength PVA and clamped them until set, cleaning off any excess adhesive. The house numbers were secured to the top board of the backing panel (you could use the screws supplied with the numbers, or swap out with black screws for a more seamless look).
For the planter, Leanne used two pieces of timber that were slightly thicker than the ones used for the backing board. She cut the planter pieces to length and glued them together. She then glued the planter assembly to the backing board flush with the base edge, and clamped until fully cured. Holes were then drilled into the top of the planter panel for the faux greenery stems. After hanging the house-number planter (using fixings appropriate for the weight and the wall type), Leanne popped artificial plants into the predrilled holes. Vision accomplished!
Check out the project steps from Leanne (Bunnings Workshop community member @craftyhopper) on the Bunnings Workshop website.
When using power tools, always wear the recommended safety gear (such as gloves, mask and eye and ear protection), follow the manufacturer’s instructions and work in a well-ventilated area.
Check out our D.I.Y. landscaping projects.
Asbestos, lead-based paints and copper chromium arsenic (CCA) treated timber are health hazards you need to look out for when renovating older homes. These substances can easily be disturbed when renovating and exposure to them can cause a range of life-threatening diseases and conditions including cancer. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer or visit our Health & Safety page.
When following our advice in our D.I.Y. videos, make sure you use all equipment, including PPE, safely by following the manufacturer’s instructions. Check that the equipment is suitable for the task and that PPE fits properly. If you are unsure, hire an expert to do the job or talk to a Bunnings Team Member.