- Pro-Repair 10 is a setting compound not an evaporative drying type with a defined working life of approximately 10 minutes after mixing.
- Pro-Repair 10 is ideal for repairing holes, nicks and cracks in new and existing plasterboard and fibre cement walls and ceilings.
- Pro-Repair 10 provides excellent tape adhesion when used as a base & second coat and is easy to sand as a top coat.
- Pro-Repair 10 is a lightweight compound with low shrinkage.
- Australian Made
Gyprock® Pro-Repair 10 is a lightweight plaster based compound with a 10 minute working time, ideal for small-scale jointing jobs, patching holes and defects in Gyprock Plasterboard and Cemintel Fibre Cement. It is tinted for easy identification.
The compound can be used as a base and topping coat, or as a base coat only, providing good tape adhesion while being easy to sand. When used for all three coats with a fibreglass, open fibre jointing tape such as FibaFuse, it is possible to sand the topcoat on the same day after sufficient drying time.
