Cabot's Cabothane is an additive to clear flooring polyurethane (CFP) that assists the floor coating to dry quicker.

APPLICATION

Apply with a brush, pad applicator, or roller

1. Pour the required amount of CFP Hardener into Cabot's CFP Floor Oil Based at the rate of 250ml per 4L and stir thoroughly.

Where smaller or larger quantities are required, carefully measure 62ml of CFP Hardener per litre of Cabot’s CFP Floor Oil Based.

2. Stir the mixture thoroughly. The mixture is suitable for application by pad applicator, brush or roller. Do not apply by spray.

Note: Once mixed, the product must be used within 2 hours.

Mix a fresh batch for each coat. Do not seal cans after mixing as pressure build up may occur.

Full cure rate for normal foot traffic: 72 hours. Please note: All curing timings are quoted at 25°C and 50% humidity. Cooler, humid conditions and how heavy the coating was applied may extend this rate.