- Easy to apply
- Long lasting and durable
- Approved by the Australian Gas Association and Type Tested to Australian Standards
The BOSTON Liquid Sealant is an anaerobic sealant, ideal for use on gas and water pipe metal threads.
Approved by the Aust. Gas Assoc. (Cert. No. 7583 Class III - 2000kPA).
Type Tested. AS/NZS 4020, PTT40067, SAI GLOBAL.
Temp. Range: -10°C to +135°C (Gas). Up to 55°C (Water).
APPLICATION: Remove oil contamination from the area where the sealant is to be applied. Apply sealant to one surface, covering 2-3 thread rotations and connect threads. Excess sealant must be wiped off. Curing time is 10-20 minutes, however full cure time is 24 hours. Hand tools required for disassembly.
IMPORTANT: This is an anaerobic sealant that seals through lack of oxygen. 50g sealant enclosed, packaging is larger to prevent in-bottle curing.
Sealant exposed to air will not cure. Metal-to-metal use only. Not suitable for plastic, glass or rubber. Excess sealant must be wiped off to prevent a metallic taste from the uncured sealant. Not recommended for continuous steam temperatures above 135°C.
Apply this product with good ventilation. If product comes into contact with eyes or skin, flush with clean water immediately. Store in a cool, dry area. Keep away from children.
