Bondall 1L Monocel Timber Waterproofer

Monocel Timber Waterproofer is a versatile, transparent water repellent treatment that penetrates dry, porous, timber surfaces to form a water repellent barrier which helps to prevent water damage and allows the treated surface to breathe, enabling moisture vapour inside to escape This helps protect your timber from water penetration and related damage. It is not recommended for protection against total immersion in water. Preparation: Ensure timber surface is clean, dry, and free from dust, grease, or contaminants. Application: Apply Monocel Timber Waterproofer undiluted by brush, roller, dipping or low pressure spray. On vertical surfaces, saturate well, working from the bottom up. On horizontal surfaces saturate well. Ensure entire area is covered and not just isolated sections. After 15 minutes, remove puddles by redistributing to dry areas. Ensure the whole area is treated, not just isolated areas. If Monocel Timber Waterproofer is over applied, wipe with a cloth soaked in mineral turpentine. Drying: Allow to dry for minimum of 24 hours, before applying a second undiluted coat. For maximum protection use two coats. More porous substrates may require additional coats