- Built for aussie conditions: tough, heat-resistant, and reliable—ideal for harsh terrain and demanding environments.
- Oem quality, better value: matches or exceeds oem specs at a lower cost. Perfect fit, no compromises.
- Tested & guaranteed : 100% performance-tested and backed by a 24-month nationwide warranty.
- Fast, local supply : readily available across australia through basco’s trusted wholesale network.
Basco Starter Motor – 8 Tooth | 12V / 1.2kW
One Brand New Starter Motor
Manufactured to strict ISO/TS16949 international quality standards, this starter motor delivers consistent cranking power and OE-grade fitment for a wide range of vehicles.
📌 Please confirm OE part number and “pinion at rest” specs before purchase.
➡️ For alternate tooth counts or fitments, refer to BSM1073.
✅ Vehicle Fitment
(All models listed use 8-Tooth Pinion configuration – check transmission type and OE if noted)
Great Wall / GWM
Steed NBP – 2.4L 4G69S4N (10/2016 – 09/2020)
V240 K2 / X240 CC – 2.4L 4G69S4N (06/2009 – 08/2016)
Super Luxury
Hyundai
Coupe RD KG21M – 1.8L G4GM (07/1996 – 04/2002)
SX
Lantra J1, J2 – 1.6L G4CR/G4GR & 1.8L G4GM/G4CN (05/1991 – 10/2000)
Manual Only – for Auto see BSM1073
Sonata Y2 / Y3 – 2.0L G4CP & 2.4L G4CS (03/1989 – 08/1998)
Manual Only
Mazda
B2600 YFY0M – 2.6L 4G54 (03/1987 – 10/1991)
DLX, Bravo, Bravo SDX
Mitsubishi
Express SJ – 2.0L 4G63 RWD (06/1994 – 10/2003)
Express SF, SJ, WA – 2.4L 4G64 RWD/4WD (06/1994 – 11/2005)
L200 MC, MD, KF, KH, KJ – 2.0L 4G63 RWD (10/1982 – 10/1986)
L300 SB, SC, SD – 1.8L 4G62 RWD (10/1982 – 1987)
Lancer CB – 1.6L 4G61/4G61T FWD/4WD (05/1988 – 06/1992)
Magna TM, TN, TP, TR – 2.6L 4G54 FWD (07/1985 – 03/1994)
Suits 8 or 9-Tooth Pinion
Pajero NA – NH – 2.6L 4G54 4WD (01/1983 – 06/1993)
RVR N13W, N23W – 2.0L 4G63/4G63T 4WD (10/1992 – 10/1997)
Starwagon SF, SG, SH, SJ, WA – 2.0L 4G63 & 2.4L 4G64 RWD/4WD (08/1986 – 10/2003)
Triton MK, ML, MN – 2.4L 4G64 RWD (06/1996 – 10/2011)
Triton ME – MJ – 2.6L 4G54 RWD/4WD (03/1986 – 1997)
⚙️ Specifications and Sizing
Voltage: 12V
Power Output: 1.2kW
Rotation Direction: Clockwise
Pinion Teeth: 8
Pinion at Rest: 18mm
Pinion Diameter: 28mm
Overall Length: 208mm
Mounting Bolt Centre-Centre: 105mm
Mounting Hole Diameter: M10 x 1.25
Flange Diameter: 77mm
Nose Cone Length: 53mm
What’s Included
1 x Starter Motor – 8 Tooth
🛡️ Basco Warranty & Customer Support
Every Basco starter motor is covered by a 24-month / 40,000km warranty and supported by an experienced team with over 100 years of combined automotive expertise.
We are the wheel end experts.
From pre-purchase fitment advice to after-sales support, Basco ensures your experience is reliable from start to finish.
Make the right decision. Go with Basco.