ANTPAK Slim 12V 105AH LiFePO4 Lithium Battery, 200A Continuous Output, 110mm Wide, 4000+ Cycles

The ANTPAK 105Ah is a 12V LiFePO4 lithium iron phosphate battery designed for 4WD vehicles, camping, and off-grid power systems. It is ultra-slim 110mm width allows installation behind vehicle seats or in confined spaces. Ultra-Slim 110mm Profile: Narrow width enables installation in tight spaces including behind rear seats, under drawer systems, or in narrow canopy compartments. Lightweight 20kg Design: Half the weight of the 210Ah model while maintaining the same discharge capability, minimizing impact on vehicle payload. Compact Dimensions: Smaller 450.5 × 310.5mm footprint suits vehicles with limited battery mounting space. 200A Continuous Discharge: Full high current output supports demanding loads including inverters, fridges, and high draw 12V accessories. Dual 50A Anderson Connections: Factory installed 50A Anderson plugs enable quick connection to existing vehicle wiring systems. Smart BMS Protection: Integrated Battery Management System provides overcharge, over-discharge, short-circuit, over-current, and thermal protection. LiFePO4 Chemistry: Lithium Iron Phosphate cells offer superior thermal stability and safety compared to other lithium battery types. Extended Cycle Life: Rated for 4,000+ cycles at 80% DoD, delivering significantly lower cost-per-cycle than AGM alternatives. Expandable Configuration: Supports parallel connection for increased capacity and series connection for 24V systems. Durable Construction: Powder-coated steel casing provides impact resistance and corrosion protection in harsh environments.