Get the same heavy-duty power and performance you expect from a trade tool but in a smaller package with the AEG 18V Brushless Sub-Compact 2-Piece 4.0Ah Kit. The power tools in this Kit are suitable for all trades, including cabinet makers, shopfitters and electricians. It features an 18V Brushless Sub-Compact 4-Mode Impact Driver, 18V Brushless Sub-Compact Hammer Drill, 18V 4.0Ah FORCE Battery, 18V 3.2A Charger and Carry Bag.

The Hammer Drill’s brushless motor generates up to 65Nm of torque, 1,750rpm and 28,000bpm for drilling into hardwoods, metals, concrete and masonry. It only weighs 1kg* and is less tiring to use overhead and while completing repetitive drilling tasks. The short length (164mm) of the Hammer Drill is easier to use in tight spaces compared to previous generations of the tool.

Gain more control with the Hammer Drill’s 2-speed gearbox and 24 clutch settings. Adjust them to reduce the risk of overdriving and damaging screws and workpieces. Engage the hammer function to drill into masonry. The built-in LED light illuminates workpieces in dark areas including under floors and wall cavities.

The lightweight Impact Driver’s weighs only 0.77kg*. It’s less tiring to use overhead or while completing repetitive driving tasks such as decking and fixing installations. The short 117mm length enables easy access to areas other impact drivers won’t get to such as tight spaces in cabinets and between pipes. The powerful yet compact brushless motor of the Impact driver delivers 180Nm, 3,100rpm and 4,400ipm.

Drive different fasteners to the right depth with the Impact Driver’s 4-mode control panel. Use Mode 3 to drive large fasteners including batten screws in 65mm-100mm sizes. Mode 2 is suitable for driving 50mm-60mm decking screws and other fasteners for cabinet and making/shopfitting. Engage Mode 1 to drive smaller screws (32mm-40mm) with increased precision. Self-tapping Mode is designed for driving smaller, tek screws into metal or installing aluminium door hardware.

Give your AEG 18V power tools an upgrade in performance and runtime with 4.0Ah FORCE Battery. Its bucket design is more compact and lighter than previous generations of AEG batteries. Improved cell housing and spacing protect the Battery from overheating and over-current damage. The built-in fuel gauge indicates how much charge is left.

Charge any AEG 18V Battery from your toolkit with the 18V 3.2A Charger. It can fully charge an 18V 5.0Ah battery in approximately 115 minutes. The LED display provides updates on temperature, charging status and overall health of the battery. Mounting holes provide an easy option for wall installation.

*Without a battery connected.

Redemption offer; redeem a bonus battery or choice of 1 of 10 bonus tools via online redemption. Visit aegpowertools.com.au/promotions for all applicable models, claims, terms & conditions. Offer is available from 1st of October 2024 to 14th of January 2025.