AEG 18V Sub Compact Impact Wrench 5Ah Kit

The AEG 18V Brushless Sub Compact 4-Mode ½” Impact Wrench provides enhanced control for tightening, loosening or pre-tensioning small to medium-sized nuts and bolts. This Kit also features an 18V 5Ah FORCE Battery and 18V 3.2A Single Port Charger. The Impact Wrench is lightweight (only 0.95kg) and compact (120mm length from anvil to motor) for easy use overhead and in hard-to-reach spaces. Its powerful brushless motor produces up to 339Nm of breakaway torque for loosening stubborn nuts and bolts. This model also generates a maximum 280Nm of fastening torque and 3,800ipm. The 4-mode selection panel offers enhanced control over speed and torque. Utilise speed mode 3 (280Nm) for maximum fastening/driving speed and torque, speed mode 2 (220Nm) for medium fastening/driving speed and torque and speed mode 1 (100Nm) for low-level fastening/driving speed and torque. Auto-tight mode generates a maximum 90Nm and automatically turns off the tool (in forward and reverse) to prevent overtightening or losing nuts when they spin off. The tri-beam LED sight light illuminates dark and confined areas for enhanced visibility. Use the on-board belt hook for on-person storage. The Battery provides generous power and runtime for all AEG 18V power tools. Battery cell spacing has been upgraded to reduce heat transfer during operation. Smart electronics enable overheat and over-current protection so your 18V tools can be pushed harder for longer. The 18V Charger is compatible with any AEG 18V battery. It can fully charge an 18V 5.0Ah FORCE Battery in as little as 115 minutes. The LED display communicates the temperature, charge status and overall health of the battery. Mounting holes can be used for wall installation. AEG is a registered trademark used under license from AB Electrolux (publ).