AEG 18V 4Ah FORCE TABLESS Battery And 12A Charger

Push your AEG 18V tools harder and get faster charger times for their batteries with the AEG 18V 4Ah FORCE TABLESS Battery and 12A Charger. This duo delivers great value for those building their toolkit with AEG 18V tools and existing users looking for another convenient charger to go with their new battery. The AEG 18V 4.0Ah FORCE Tabless Battery enables your tools to be pushed harder for longer in aggressive, heavy-duty applications. With its own thermal management system, this Battery is more resistant to over-temping under heavy loads compared to standard AEG FORCE batteries*. A cooler battery means less downtime for your tools. The FORCE Battery is better equipped to power your tools through demanding tasks that require a more sustained performance. It delivers up to 25% more power** and longer runtimes in high draw applications compared to a 4.0Ah FORCE battery. Execute long rip cuts through stacked boards and drill a row of deep holes in concrete with minimal interruption. Standard 18V Batteries rely on single or dual internal tabs to transfer energy. They can generate excessive heat under heavy loads and over-temp. This FORCE Battery’s tabless cells maximise energy flow by utilising more energy pathways within each cell. The addition of laser welding, thicker welded straps and larger heat sinks keep the Battery running cooler, reducing the occurrence of over-temping. Take advantage of an improved performance from 18V FUSION tools including circular saws, hammer drills and reciprocating saws. This Battery weighs only 655g to significantly reduce the strain of operating tools overhead and for extended periods. Use the onboard fuel gauge to check the battery charge status. The AEG 12A Turbo Charger provides fast charge times for AEG 18V Batteries to reduce downtime. With a 12A charge rate, it can charge an 18V 4Ah FORCE TABLESS Battery to 80% in just 17 minutes***. The detailed LED display communicates charge status and other crucial battery health metrics. Vented and coated electronics enable heat dissipation to maintain performance, charge rates, longevity and safety. The Charger is wall-mountable for convenient access. Its compact design takes up minimal space in any workshop, van or worksite. *Test results performed under lab conditions by Techtronic Industries between 8 January - 15 February 2025 showed the 18V 4.0Ah FORCE TABLESS Battery, used under heavy load applications, generated 29% faster cutting with the 184mm FUSION Circular Saw (A18FCS680), 24% faster drilling with the FUSION Hammer Drill (A18FPD0) and 15% faster driving with the FUSION Impact Driver (A18FID0) when compared to the AEG 18V 4.0Ah FORCE Battery (A18FB4). **Based on test results performed under lab conditions by Techtronic Industries between 1 March - 30 October 2024. Max output can be sustained for up to 10 seconds. Power applies to battery output. Tool performance may vary. ***When charging a new 18V 4Ah FORCE TABLESS Battery. AEG is a registered trademark used under license from AB Electrolux (publ).