Voltx 2000va 2000w Ups + 60a Mppt Solar Charge Controller - Solar Backup Power System

⚡ now back online — improved stock & faster dispatch. Ideal for camping, home backup & off-grid power solutions ⚡ voltx 2000va ups + 60a mppt solar controller bundle — backup & off-grid power solution ・reliable backup power — voltx 2000va ups keeps computers, routers, and office devices running during outages ・smart solar charging — 60a mppt controller efficiently charges batteries from solar panels ・perfect for off-grid use — ideal for rvs, cabins, remote workstations, or emergency backup setups ・extended equipment life — intelligent ups and mppt protections prevent overload, over-discharge, and short circuits ・complete power solution — everything you need in one bundle, shipped separately for safety and convenience --- product 1: voltx 2000va 2000w ups --- ### specifications --- quick look --- ・phase: single phase with ground ・capacity: 2000va /2000w ・output: 8x 10a; 1x 16a ・input: 1x 220/230/240v ・communication port: 1x usb; 1x rs232 ・product size: w440 x d500 x h86.5mm ・warranty in years: 5 --- input --- ・nominal voltage: 220/230/240vac ・operating voltage range (ambient temp. <40) ・low line transfer: 176vac±5% @100%-50% load; 110vac±5% @50%-0% load; ・low line comeback: 186vac±5% @100%-50% load; 120vac±5% @50%-0% load; ・high line transfer: 300vac±5% @100%-0% load; ・high line comeback: 290vac±5% @100%-0% load; ・operating frequency range: 40-70hz ・input power factor: >0.98@100% load(nominal input voltage) ・bypass voltage range: ・bypass high voltage point ・230-264: setting the high voltage point in lcd from 230vac to 264vac (default: 264vac) ・bypass low voltage point ・176-220: setting the low voltage point in lcd from 176vac to 220vac. (default: 176vac) ・generator input: support --- output --- ・output voltage: 200/208/220/230/240vac ・power factor: 1.0 ・voltage regulation: ±1% ・frequency ・line mode (synchronized range): 46-54hz or 56-64hz ・bat. Mode: (50/60±0.1)hz ・crest factor: 3:1 ・harmonic distortion (thdv): ・≤3% thd with linear load ・≤5% thd with non linear load ・waveform: pure sine wave ・transfer time ・ac mode <->batt. Mode: 0ms(typical) ・inverter <-> bypass: 4ms(typical) ・on line efficiency: 92% ・economy mode efficiency: 96% --- battery --- ・battery type(lithium): 76.8v6ah ・backup time: 9min @ full load ・typical recharge time(standard model): 4 hours recover to 90% capacity (typical) ・charging voltage: 84.0 vdc ±0.2vdc ・charge current: 2a --- system features --- ・over load capability (online mode): ・105%-125%: ups transfer to bypass after 1 minute when the utility is normal ・125%~130%: ups transfer to bypass after 30 seconds when the utility is normal ・>130%:ups transfer to bypass after 0.2 second when the utility is normal ・over load capability (battery mode): ・105%-125%: ups after 1minute shut down ・125%~130%: ups after 10 seconds shut down ・>130%: ups after 0.2 second shut down ・short circuit: hold whole system ・overheat: line mode: switch to bypass; backup mode: shut down ups immediately ・low battery voltage: alarm and switch off ・epo (optional): shut down ups immediately ・audible & visual alarms: line failure, battery low, overload, system fault ・communication interface: usb(or rs232), snmp card(optional), relay card (optional) --- others --- ・operating temperature 0°c~40°c ・storage temperature -25°c~55°c ・humidity range 0~95% (non-condensing) ・altitude: up to 1000m (no derating) ・noise level: <50 db at 1m --- standards --- ・safety: cb: iec 62040-1:2017, ce-lvd: en 62040-1:2008+a1:2013 ・emc: iec 62040-2-2016, en 62040-2-2018 c2 ・transportation: ista procedure 2a ・surge protection: iec 61000-4-5 ### dimensions & weight ・product size: w440 x d500 x h86.5mm ・net weight: 16.1kg ### what's in the box ・1x voltx 2000va /2000w ups ・1x usb cable ・1x rs232 cable ・1x power cord ・2x mounting ears ・4x standing holders ・1x user manual --- product 2: 60a mppt solar charge controller --- ### specifications --- electrical parameters --- ・static power consumption: ≤50ma ・battery type: use/fld/gel/li/sld(default) ・system voltage: 12v/24v ・battery's operating voltage range: 8v-32v ・rated charging current: 60a ・maximum pv input current: 53a ・maximum solar panel power: 800w/12v; 1600w/24v ・maximum pv open-circuit voltage: 150v ・mppt operating voltage point range: (battery voltage +2)~110v ・mppt tracking efficiency: >99% ・charging conversion efficiency: 85%-98% (10%-100% of rated power) ・rated load current: 40a ・load operating mode: pure light-dependent control, light and time-dependent control, manual mode (default), debugging mode, normally opened. ・ttl communication: baud rate 9600kps ・rs485 communication: 2 isolated rs485 communication ports, ・supporting parallel use, with power output of 5v200ma, baud rate of 9,600kps by default and adjustable. ・bluetooth communication: built-in ・can communication: rv-c protocol ・historical data: can store historical data of the past 300 days ・backlight function: light up if the key is pressed down, and automatically turn off in 20s if there is no key action ・protection function: pv overvoltage protection, pv reverse connection protection, pv short-circuit protection, nighttime reverse charge protection, input limited power protection, overtemperature protection, load short-circuit protection, load overload protection, battery supervoltage/over-discharge protection, battery reverse connection protection and battery terminal short-circuit protection. ・grounding type: co-negative design and negative grounding ・cooling mode: natural cooling ・parallel connection for charging: yes ・charging voltage line loss compensation: yes ・support full settings: yes ・constant voltage output setting: yes ・charging temperature compensation of lead-acid battery: yes ・temperature protection: yes ・overload/short-circuit protection: yes ・load pre-start: yes ・protection grade: ip32 ・operating ambient temperature range: -35°c~ 65°c (no derating within 45°c if well ventilated) ### dimensions & weight ・dimension: 260x216x98.5mm ・mounting hole spacing: 200 mm ・weight: 3.4kg ・fixed hole position: φ10mm ### what's in the box ・1x 60a mppt solar charge controller tips for bluetooth functionality: additional bluetooth module is required to achieve bluetooth functionality. tips: the items in this bundle will be shipped separately, the packages may arrive at different times, please be patient and wait.