Nikon RT-1 Tripod Collar Ring For AF-S 70-200mm f/4G and AF-S NIKKOR 300mm f/4E

The Nikon RT-1 Tripod Collar Ring For AF-S 70-200mm f/4G and AF-S NIKKOR 300mm f/4E is designed for the 70-200mm f/4G lens. The ring makes rotating your lens easier and the built-in tripod collar improves lens balance by screwing into the tripod mount. Key Features of the Nikon RT-1 Tripod Collar Ring For AF-S 70-200mm f/4G and AF-S NIKKOR 300mm f/4E For 70-200mm f/4G Lens Improves Tripod-Mounted Lens Balance Freely Rotates For Easy Lens Adjustment Thumbscrew Tightens and Loosens Ring Improves Lens Balance The ring secures your lens to the camera's tripod Thumbscrews Tighten And Loosen Ring Having a thumbscrew control the ring makes it easy to adjust the tripod ring on the go Gives Your Camera Setup Better Balance The ring adds stability to your camera and lens. Due to its weight, when the lens is mounted with a camera on a tripod, the center of gravity is shifted to the lens. The ring attaches to the tripod and can be shifted to any position on the lens, ensuring the weight is evenly distributed Rotation Having the camera secured with a ring around the lens makes it possible to rotate the lens between landscape and portrait modes without removing the camera from the tripod. The position of the camera distinguishes portrait or landscape mode, not the position of the lens. The friction thumbscrews can then be tightened to secure the camera in the desired position. When not needed, the ring can be rotated to an out of the way position Hinged Design The hinge provides the ability to keep the lens attached to the camera while disconnecting the lens from the tripod MPN - JAW01001 GTIN - 018208049813