Bunnings logo with a piece of holly.
Icon - Website - Mobile - Add to project list.svgIcon - Website - Mobile - Cart.svg

Sign in to your account

Project list

Sign in to your account

Woman opening a wooden toybox full of children's toys

Overview

Stow away their toys and create a stylish, functional addition to your children's bedroom by upcycling a toybox. All you'll need is an old chest and some nifty know-how.

Steps

1Gather your tools and materials

Below are all of the tools and materials you'll need to complete this project.
Tools and materials required to complete this project

2Sand your box back

Before you do anything, you'll need to sand your chest back to its raw state – in our case, raw pine. We used an electric sander (don't forget your ear and eye protection) with 120-grit sandpaper to remove all the old gloss and varnish. If you only have a block and some sandpaper, that's fine too. Sanding back the surface removes any old finishes and allows a clean slate for new products or paint to be applied. Once you're done, wipe away the dust with a damp cloth, and wait for it to dry.

Woman using cordless sander to sand a pine chest

3Apply varnish

Now we've brought our chest back to its original state, we can see how pretty the wood grain is. We want to keep this look, so we're using two coats of a clear varnish. Simply pour your varnish into a paint tray and apply using a paintbrush to the fine details first, then a roller for the larger areas. If you want a slightly darker finish, you may want to consider using three coats. Or if you'd like to paint your chest, now's the time to do that.

Person pouring varnish into a paint tray

4Grab a safety hinge

Our chest is pretty heavy and not really suitable for little fingers, so we added a safety hinge to allow for easy opening and closing. These are technically called pneumatic stays. Ask your friendly Bunnings worker to point you in the right direction in-store – there are various sizes to choose from, so you'll find one that fits.

Person marking a screw hole on the underside of a chest lid

5Mark up where you want your hinges to go

Before you affix your hinge, mark up where you'd like it to go using a tape measure and your pencil. Once you've done this, drill some pilot holes. The drill bit size required for your screw will usually be marked on the pack, but if it's not, us a drill bit with a slightly bigger diameter. Attach the circular piece of your stay first before you attach the hinge – if you don't do this separately you won't be able to screw your hinge in properly.

6Attach your main hinge

Using the screws from your pneumatic stays kit, screw in your main hinge. Once you've done this, you'll notice your chest now opens and closes with ease.

Person attaching bracket to the inside of a wooden chest

7Attach a new handle

Measure where you want your handle to go – best to measure the length of your chest, then mark up the middle point. Use a drill to drill a hole for the handle, then use a screwdriver to screw in and tighten.

Woman positioning a knob on the lid of a wooden chest

8A treasure chest for your littlie

And you're done! How easy was that? No more jammed fingers! And you've now got a nice, safe place for kids to stow their toys.

Woman kneeling beside a wooden toybox full of children's toys

9Watch more from the series

For more simple D.I.Y. inspiration check out the full episode from Make It Yours Kids Bedroom Makeover by Poppy Lee.

Suggested products

More D.I.Y. Advice

Health & Safety

Asbestos, lead-based paints and copper chromium arsenic (CCA) treated timber are health hazards you need to look out for when renovating older homes. These substances can easily be disturbed when renovating and exposure to them can cause a range of life-threatening diseases and conditions including cancer. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer or visit our Health & Safety page.

When following our advice in our D.I.Y. videos, make sure you use all equipment, including PPE, safely by following the manufacturer’s instructions. Check that the equipment is suitable for the task and that PPE fits properly. If you are unsure, hire an expert to do the job or talk to a Bunnings Team Member.