Project list
Sign in to your account
With project lists you can...
Please sign in or create an account to use Project Lists
Head in store and choose an outdoor cushion that suits the size of your bed – there are stacks of options to choose from in the outdoor furniture aisle at your local store. A standard-sized outdoor bench cushion is perfect for a queen-size bed. Remove your cushion cover (it should just zip off) and set aside – you won't need this.
You can use any fabric for this bed head – we're using hessian, which is super cheap and easy to work with. Measure and cut your fabric so it can wrap around the cushion twice, or so it provides enough coverage for the bedhead. Trim off any excess fabric.
We used contact adhesive to stick our material together – just spray it on in a well-ventilated area. After you've done this, turn the fabric over and turn the edges in like you're wrapping a present – keep it tight – we don't want the fabric looking messy. Once you've done this you can stick your edges down too using that spray adhesive.
While your glue dries, and to provide an extra secure attachment, use safety pins to fix the folded-down edges – don't worry, you won't see these.
Grab your two belts and buckle them over the fabric at each end. Make sure the buckles are at the back of your bed head – these are what your bed head is going to hang from when it's on your wall.
Measure your bedhead from the ceiling down and mark the point on the wall you'd like it to hang – do the same for the other side too. If you're working with plaster, you'll need to use a stud finder to locate and find the wall studs – this is where you'll be drilling. If you can't locate any near where you'd like to hang your bedhead use a wallmate, drilled flush to the wall. When drilling, don't forget to wear eye protection.
Before drilling in the second hanger make sure the rod is hanging straight – use a level for this (when the bubbles are at the centre, you're good to go). Once this is done, drill in your second hanger.
The last bit is the most fun – hang your belted bedhead on its rod and thread through the hanging brackets. Once this is done just attach your end caps – these will protect your wall and stop your bedhead dropping off at one end! And – you're done!
Watch the full episode and more D.I.Y. projects from Make It Yours Episode 2: Master Bedroom Makeover by Geneva.
Asbestos, lead-based paints and copper chromium arsenic (CCA) treated timber are health hazards you need to look out for when renovating older homes. These substances can easily be disturbed when renovating and exposure to them can cause a range of life-threatening diseases and conditions including cancer. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer or visit our Health & Safety page.
When following our advice in our D.I.Y. videos, make sure you use all equipment, including PPE, safely by following the manufacturer’s instructions. Check that the equipment is suitable for the task and that PPE fits properly. If you are unsure, hire an expert to do the job or talk to a Bunnings Team Member.
