Project list
Sign in to your account
With project lists you can...
Please sign in or create an account to use Project Lists
Cut the pine to two lengths of 915mm and two of 526mm. Have the pegboard sheet cut in-store or use a handsaw to cut it in half to be 915mm high and 610mm wide, then arrange the pine pieces to fit the pegboard.
Position the pegboard over the pine, edges flush, and attach it from the top with white screws, securing through the existing holes, with three screws evenly spaced down the long sides and two on the short.
Smooth along the edges and corners with 180-grit abrasive paper, removing breakout around the screws. Wipe with a clean cloth to remove dust, then use a mini roller to apply two coats of white paint.
Tip: When painting pegboard, use a roller for even coverage, but avoid overloading with paint to prevent the pegboard holes from clogging. It's best to use a primer before applying strong colours, although it's not needed for white
Thread framing wire through both hooks, doubling it over with 100mm extra, cutting with combination pliers and twisting the excess around both strands to prevent it unravelling. Hang the display on a wall hook to stop it tipping forward.
Asbestos, lead-based paints and copper chromium arsenic (CCA) treated timber are health hazards you need to look out for when renovating older homes. These substances can easily be disturbed when renovating and exposure to them can cause a range of life-threatening diseases and conditions including cancer. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer or visit our Health & Safety page.
When following our advice in our D.I.Y. videos, make sure you use all equipment, including PPE, safely by following the manufacturer’s instructions. Check that the equipment is suitable for the task and that PPE fits properly. If you are unsure, hire an expert to do the job or talk to a Bunnings Team Member.
