SpecRite 2400 x 900mm 33mm Timber Panel Teak FJ Laminated

Storage: It is important that your panels are stored flat and protected from the weather. They should not be exposed to extreme changes in humidity. It is recommended that panels are stored fully wrapped in plastic until use.
Sealing: When exposing the panel ends by cutting or drilling it is good practice to temporarily tape the unprotected surfaces until a varnish is applied. Laminated panels should be thoroughly sealed on all surfaces (top, bottom, sides, ends) with a varnish prior to installation or as soon as possible after installation. Failure to seal your panels properly may result in uneven moisture content in the timber, leading to potential cupping and end splits.
Installing: When installing, ensure sufficient space is left to allow the panel to expand to prevent deformation when humidity changes.