Remsafe Window Restrictor Track Lock - Black

I/N: 0026021
Price correct as at Fri 24 May 2019 6:16:14am
Add to Store Order
Products can be picked up or delivered. Your local store will contact you to confirm stock availability, delivery charges and organise payment.
Add to Cart
Confirm whether the customer will pick up their order or have it delivered. Contact the supplier to confirm stock availability. If applicable, please organise payment at this time.
Not all products available in all stores
Contact your nearest store for product information.

Special Order

Contact your nearest store to order

Product Description

The Remsafe Track Lock provides a versatile safety solution for sliding windows where minimal window sill, narrow window track or blinds and shutters limit installation options.

With a slim 14 mm body, its the narrowest of its kind on the market, which allows it to fit almost all aluminium tracks.

The Track Lock window restrictor is easy to install, keyed alike across the range and is mounted within the top of the window track to offer a discreet solution to window safety.

  • Easy DIY installation
  • Tested in Australia to comply with safety requirements under Australian legislation
  • Keyed alike across the Remsafe range
  • Australian owned and designed
  • Child resistant release mechanism allows the window to be opened to its full extent if required

Product Details

Model Name
Remsafe Track Lock Black
Model Number
Product Dimensions (mm)
W:14 H:36 L:45
Package Dimensions (mm)
W:46 H:36 L:14
Keys Included
Number of Keys

Product Downloads

Installation Guide
User Guide

Additional Info

Installation Info


1. With the window closed, use a tape measure to measure a maximum opening distance of 12.5 cm on the top window sill and mark with a pencil. The opening distance must not exceed 12.5 cm at any point.

2. Hold the locking plate with the front edge in line with the pencil line at 12.5 cm and mark the 2 fixing holes. The lock body may be fitted either horizontally or vertically.

3. Drill the pilot holes using a 2 mm drill bit. Attach the locking plate inside the window track using the screws provided.

4. Slide the body of the Track Lock into place over the locking plate. Ensure the rubber stop on the lock body is facing the sliding part of the window. Lock the Track Lock in place using the key provided.

5. The lock may be unlocked with the key and the lock body may be removed by sliding it in the opposite direction away from the locking plate. This will allow the window to open to its full extent.

6. Test lock function by locking and unlocking with the key. Ensure the lock body is securely locked into the locking plate. The key must be used to lock the lock. Ensure the opening distance does not exceed 12.5 cm.

7. An additional locking plate may be installed at the far end of the top window track to store the lock body when the window is in the fully open position.

Top of the content